LETTERING STICK The enclosed lettering stick enables you to easily remove the backing from labels printed on laminated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand. 2 Pass the tape halfway through the long narrow hole in the stick. 3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown below. 4 Peel off the label backing. STARTING Press . If batteries have been installed or the machine

Do not use tapes that do not have the mark. • Three different tape widths are available: 1/4" (6 mm), 3/8" (9 mm) and 1/2" (12 mm). • Do not pull the tape. This may damage the tape cassettes. • Do not attempt to cut the tape while printing or feeding since this will damage the tape. • Do not clean the machine with alcohol or other organic solvents. Use only a soft, dry cloth. • Remove the batteries if you do not intend to use your machine for an extended period of time. (Note: When power is disc