Log:
Évaluations - 3, GPA: 4.3 ( )

Instructions Flymo, Modèle EASICUT 5500

Fabricant : Flymo
Taille : 3.37 mb
Nom Fichier : aef32f11-fd50-47ce-b102-d6b815d982a2.pdf
Langue d'enseignement: ruplitenesfrdeetnlhuskdaficslvltro
Aller à la télécharger



Facilité d'utilisation


Do not pull cable around sharp objects. 10. Always switch off at the mains before disconnecting any plug, cable connector or extension cable. 11. Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Husqvarna Outdoor Products replacement cable. 12. Always wind cable carefully, avoiding kinking. 13. Use only on AC mains supply voltage shown on the product rating label. 14. Our products are double insulated to EN50144. Under no circumstances should an earth be connected to any part of the product. Cables Use only 1.00mm2 size cable up to 40 metres length maximum. Maximum rating: 1.00mm2 size cable 10 amps 250 volts AC 1. Mains cables and extensions are available from your local Approved Service Centre. 2. Only use extension cables specifically designed for outdoor use. Preparation 1. Always wear suitable clothing, gloves, and stout shoes. The use of safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts. 2. Thoroughly inspect the area where the product is to be used and remove all wires and other foreign objects. 3. Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. 4. Always ensure the hand guard supplied is fitted before using the product. Never attempt to use an incomplete product or one with an unauthorised modification. Use 1. Use the product only in daylight or good artificial light. 2. Avoid operating your product on a wet hedge, where feasible. 3. Know how to stop the product quickly in an emergency. 4. Never hold the product by the guard. 5. Never operate the product with damaged guards or without guards in place. 6. Remove plug from mains before passing product to another person. 7. Avoid operating while people especially children are nearby. 8. Whilst using the product always be sure of a safe and secure operating position. Do not overreach. Keep proper footing and balance at all times. 9. Keep hands and feet away from the cutting ENGLISH - 1 SAFETY PRECAUTIONS means at all times and especially when switching on the motor. 10. Do not use stepladders whilst operating the product. 11. Remove the plug from the mains :- before leaving the product unattended for any period; -before clearing a blockage; -before checking, cleaning or working on the appliance; -if you hit an object. Do not use your product until you are sure that the entire product is in a safe operating condition; -if the product starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury. - before passing to another person. Maintenance and storage 1. Keep all nuts, bolts and screws secure to be sure the product is in safe working condition. 2. Replace worn or damaged parts for safety. 3. Be careful during adjustment of the product to prevent entrapment of the fingers between moving blades and fixed parts of the...

Ce manuel est également adapté pour les modèles :
Clippers - EASICUT 6000XT (3.37 mb)
Clippers - EASICUT 6500XT (3.37 mb)
Clippers - EASICUT 7000XT (3.37 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories