Log:
Téléchargements : 8   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

The characteristics of the mixture tend to deteriorate in time, so you should only prepare as much mixture as you are going to need (the use of deteriorated fuel can seriously damage the engine). Filling the tank 14 15 Clean the area around the fuel cap before removing it, to prevent any impurities from contaminating the fuel. Take the cap off the fuel container carefully. Unscrew the cap on the fuel tank and fill it with the necessary quality, using a funnel. During use, to prevent problems in

Téléchargements : 11   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Start the engine at a distance from the filling site and far away from any fuel tanks (at least 3 meters). 15 When filling the fuel tank, dry any spilled fuel. Never add fuel in the tank when the engine is running or hot to avoid the risk of fire (let the engine cool off before filling the tank). Fill the tank outdoor, far from flames or sparks. Do not take the cap off the tank with the engine running. Open the cap on the tank carefully to eliminate any excess pressure. After fueling, close the

Téléchargements : 6   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Cut only the material recommended for each accessory and take care not to let the blades come into contact with rocks, metal parts, etc. The blade is sharp, so be very careful when handling it even with the engine off. 11 Keep any other persons or animals away from the work zone (minimum distance 15 meters). Since there is a danger when you are working that the blade or nylon string head could throw out grass, dirt, rocks or foreign bodies, when someone approaches switch the engine off or stop t

Téléchargements : 0   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Replace the reel in its housing and thread the ends of the strings in their bushings. Pull each string so that about 15 cm comes out on each side. Reassemble the nylon string head as shown (fig. H5). If the reel becomes excessively worn, replace it with a whole new reel. I. Techniques for use 1 4 5 6 7 8 9 10 11 12 13 14 16 Wait until the engine is running at minimum speed before moving the Backpack adjustment During adjustment remember that the weight of the machine should be distributed mainl

Téléchargements : 6   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and trademarks in several countries. © Electrolux Outdoor Products Italy The Electrolux Group. The world’s No. 1 choice The Electrolux Group is the world.s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers

Téléchargements : 0   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Insertion of padding on frame A0 Pick up the frame+motor assembly and place them on the base; insert the upper part of the padding on the frame and fasten it with the two straps as shown in the figure. Take the support for the starter knob and fit it as shown in the figure. Fasten the starter cord to the support as shown in figure. E3. Assembly of the transmission shaft to the flexible shaft aE j Pull the plastic ring nut away from the end of the rigid tube turning it counterclockwise if ne

Téléchargements : 3   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and trademarks in several countries. © Electrolux Outdoor Products Italy The Electrolux Group. The world’s No. 1 choice The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mo

Téléchargements : 0   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Check that the cutting tool does not move with the motor running at idle speed. Make sure the transmission pipe is properly fastened to the motor joint and the line cutter head or blade are correctly fastened with the screw fastening the blade fully tightened. Check the backpack and make sure the motor is securely fastened to its housing. □ Replace any accessories (blades, nylon string heads, guards) which show damage or cracks or appear excessively worn. Have your Authorized Service Center rep

Téléchargements : 0   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

• Do not allow children or persons who are not familiar with these instructions and are not sufficiently trained to use the brush cutter. Local regulations may specify an age limit for users. • Keep this manual with the machine when selling or lending it, to enable the future users to familiarize themselves with the product and instructions for safe use. • All parts of the manual are equally important for the purpose of preventing injury to the operator or damage to the machine. To facilitate yo

Téléchargements : 2   Taille : 6 mb   Fabricant : Electrolux  
Catégorie : Clippers
@name

Startup of cold engine F1. Stop switch (A) turned to “I” opposite the “STOP” mark. F2. Turn the fuel enrichment lever (B) to the closed position. F3. Pump by pressing several times on the bulb (C) until you see the fuel flow back into the tank through the tube (D). Put on the backpack. Pull the starter cord evenly, without jerks, and release it in the same way until the motor catches. Let the motor run for a few seconds and accelerate. This will automatically return the fuel enrichment lever to





catégories