Log:
Évaluations - 4, GPA: 4 ( )

Instructions Panasonic, Modèle EP1010

Fabricant : Panasonic
Taille : 1.41 mb
Nom Fichier : EP1010.PDF
Langue d'enseignement: enesfr
Aller à la télécharger



Facilité d'utilisation


It may cause the switch to malfunction. 7. Some sounds may be heard coming from the massager while in use. This is due to the structure of the massager. This is a normal condition. 8. Make sure that there are no obstacles behind the chair when reclining it. The chair can be reclined to a maximum angle of 160°. If the back hits a wall or pillar, it may malfunction. Be sure to have ample space behind the chair. Recline chair slowly in order to avoid contact with an obstacle. 9. When excessive pressure is applied to the massage heads, they may stop moving for safety. When moving the heads up from the lowered position, the body weight may stop the heads movement. In such case, slightly raise the body and allow the heads to move up. 10. After each massage, slide the power switch which is located on the side of the chair to “off” position and turn its lock switch to “lock” position. NOTE: Maximum user weight is 264 lbs (120 kg). CARING FOR THE MASSAGER • Always unplug chair before cleaning. • If the covering becomes soiled, dampen with liquid soap and brush the surface. Wipe with a cloth dampened with water. Allow to dry naturally. If the plastic portions become soiled use lukewarm water, with liquid soap on a soft cloth to clean the surface. • Do not use thinner, benzene or other solvent type cleaners. 5 PARTS IDENTIFICATION Massage lounger Head rest •Attaches to the chair cover Power source Power consumption Kneading speed Tapping speed Rolling massage speed Massage width Back rolling width/tapping width Massage heads up/down travel Regional back rolling Intensity adjustment Shoulder position adjustment Automatic shut-off Leg massager - vibration Dimensions (H x W x D) Reclining angle Weight Accessories 120 VAC, 60 Hz 135 W Approx. 28 times/min. Approx. 500 times/min. (per side) Approx. 1 cycle every 37 sec. Shoulder/lower back section : Approx. 2 15/16 in. (75 mm) Narrow : Approx. 3 5/16 in. (85 mm) Wide : Approx. 4 5/16 in. (110 mm) : Approx. 23 1/16 in. (600 mm) : Automatic repetition within approx. 4 12/16 in. (120 mm) range : Adjusts massage head protrusion steplessly within approx. 1 3/4 in. (45 mm) range 7 steps Approx. 15 min. Approx. 3200 cycles/min. Shut-off timer: Approx. 30 min. : • Not reclined and legrest stored : 41 11/32 x 34 41/64 x 40 35/64 in. (1050X880X1030 mm) • Reclined and legrest extended : 29 9/64 X 34 41/64 x 68 7/64 in. (740X880X1730 mm) Approx. 127° to 160° 115 lbs. (52 kg) Back cushion, headrest 7 TURNING ON THE POWER First read and familiarize yourself with the safety precautions. • Plug the power cord into the inlet located at the rear of the chair. Plug the power cord into an AC outlet. Be careful not to pinch the cord under the leg frames of the chair or any other items. Power switch Controller Operating lock switch — _ NOTE: • The operating lock switch prevents the unit from being turned ‘on’ when switch is in the “lock" position. 8 3 .. Power switch Controller ; storage pocket Power plug 1. Using a flat screwdriver or similar object, insert into the lock switch and turn to “open”. 2. Move the power switch to “on”. •When the operating lock switch is pointing toward “lock”, the power switch cannot be moved to the “on” position. After each use. • Be sure to turn the power switch to “off”. • To prevent children from using this unit, safety lock the power switch by moving the operating lock switch to the “lock" position. • As a further caution, unplug the power cord from the outlet after each use. 6 ö lock open on o off 8 CONTROLLER Cover closed : Programmed course massage Cover open : Manual massage COMMON OPERATION PROGRAMMED MASSAGE MANUAL MASSAGE manual operation Operation indicator lamp Massage selector button pT) V upward J down up 0© Up/down adjustment button r%T) Vdownvwdy rr) intensity ©© Intensity adjustment button tapping _y UÛ O'-ft-N width °©°© Width adjustment button stroke e© ....... Stroke adjustment button 9 TO START/STOP MASSAGE ACTION Before using, first read all the instructions including the warnings and safety precautions as well as the section on programmed and manual massage. 1. To operate the massager, press “start/reset” button. • Check to be sure the operation indicator lamp is lit. 2. If you wish to stop the massage temporarily, press “stop" button. The massage heads will stop where they are. • Check to be sure the operation indicator goes out. To resume massage press “start/reset” button. 3. After final use, press “start/reset” button. • The massage heads will go up, spread out and stop in the restore position. With the heads in this position you can sit comfortably, using the massager as a regular chair. • Be sure to store the controller in the pocket on the side of the left arm rest when not in use. 4. Do you want programmed or manual operation? • If you wish to select a programmed massage, press buttons with cover ...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories