Log:
Évaluations - 1, GPA: 1 ( )

Instructions Gigabyte, Modèle GA-945GMF-S2

Fabricant : Gigabyte
Taille : 7.82 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Par ce dispositif a également d'autres instructions :

Facilité d'utilisation


Instances of Non-Warranty 1. Damage due to natural disaster, accident or human cause. 2. Damage as a result of violating the conditions recommended in the user manual. 3. Damage due to improper installation. 4. Damage due to use of uncertified components. 5. Damage due to use exceeding the permitted parameters. 6. Product determined to be an unofficial Gigabyte product. -11 - Hardware Installation English 1-2 Feature Summary CPU • Supports LGA775 Intel® CoreTM 2 Extreme / CoreTM 2 Duo / Pentium® D / Pentium® 4 • L2 cache varies with CPU Front Side Bus • Supports 1066/800/533 MHz FSB Chipset • Northbridge: Intel® 945G Express Chipset • Southbridge: Intel® ICH7 LAN • Onboard Realtek RTL8111B chip (10/100/1000 Mbit) Audio • Onboard Realtek ALC883 CODEC chip • Supports High Definition Audio • Supports 2 / 4 / 6 / 8 channel audio (Note 1) • Supports SPDIF In/Out connection • Supports CD In connection IEEE 1394* • Onboard T.I. TSB43AB23 chip • 3 IEEE 1394a ports Storage • Intel® ICH7 Southbrigde -1 FDD connector, allowing connection of 1 FDD device -1 IDE connector (IDE) with UDMA 33/ATA 66/ATA 100 support, allowing connection of 2 IDE devices -4 SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3), allowing connection of 4 SATA 3Gb/s devices O.S Support • Microsoft Windows® 2000/XP Memory • 4 DDRII DIMM memory slots (supports up to 4 GB memory) (Note 2) • Supports dual channel DDRII 667/533 unbuffered DIMMs (Note 3) • Supports 1.8V DDRII DIMMs Expanstion Slots • 1 PCI Express x16 slot • 1 PCI Express x1 slot • 2 PCI slots Internal Connectors • 1 24-pin ATX power connector • 1 4-pin ATX 12V power connector • 1 floppy connector • 1 IDE connector • 4 SATA 3Gb/s connectors • 1 CPU fan connector • 1 system fan connector • 1 front panel connector • 1 front audio connector • 1 CD In connector • 1 SPDIF In/Out connector • 1 HDA_SUR connector • 2 USB 2.0/1.1 connectors for additional 4 ports by cables • 2 IEEE 1394a connectors for additional 2 ports by cables* • 1 COMB connector • 1 CI connector • 1 power LED connector "*" Only for GA-945GMF-S2. GA-945GM-S2 / GA-945GMF-S2 Motherboard -12 English Rear Panel I/O • 1 PS/2 keyboard port • 1 PS/2 mouse port • 1 parallel port • 1 serial port (COMA) • 1 VGA port • 4 USB 2.0/1.1 ports • 1 IEEE 1394 port* • 1 RJ-45 port • 3 audio jacks (Line In / Line Out / MIC In) I/O Control • IT8718 chip Hardware Monitor • System voltage detection • CPU temperature detection • CPU / System fan speed detection • CPU warning temperature • CPU / System fan failure warning • CPU smart fan control BIOS • 1 4 Mbit flash ROM • Use of licensed AWARD BIOS Additional Features • Supports @BIOS • Supports Download Center • Supports Q-Flash • Supports EasyTune(only supports Hardware Monitor function)(Note 4) • Supports Xpress Install • Supports Xpress Recovery2 • Supports Xpress BIOS Rescue Bundle Software • Norton Internet Security (OEM revision) Form Factor • Micro ATX form factor; 23.3cm x 24.4cm (Note 1) To set up an 8 channel audio configuration, you must use 5.1/7.1 Surround Cable (optional). (Note 2) Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount. For example, 4 GB of memory size will instead be shown as 3.xx GB memory during system startup. (Note 3) To use a DDRII 667 memory module on the motherboard, you must install an 800/1066 MHz FSB processor. (Note 4) EasyTune functions may vary depending on different motherboards. "*" Only for GA-945GMF-S2. -13 -Hardware Installation English Fig. 3 Fig. 4 Notice the small gold Once the CPU is colored triangle located properly inserted, on the edge of the CPU please replace the socket. Align the load plate and push the indented corner of the metal lever back into its original position. CPU with the triangle and gently insert the CPU into position. (Grasping the CPU firmly between your thumb and forefinger, carefully place it into the socket in a straight and downwards motion. Avoid twisting or bending motions that might cause damage to the CPU during installation.) 1-3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and CPU cooler. 4. Please make sure the CPU cooler is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur. 5 . Please set the CPU host frequency in accordance with the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper s...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories