Instructions Gigabyte, Modèle GA-8S661GXM-775
Fabricant : Gigabyte
Taille : 6.68 mb
Nom Fichier :
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. -65 -Appendix English Step 2: Later, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you intent to install Microsoft Windows 2000/XP (Figure 2). CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Hard Disk Boot Priority 1. SCSI-0 : ST3120026AS 2. SCSI-1 : ST3120026AS 2. Bootable Add-in Cards ....: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit Item Help Menu Level ..• Use <..> or <..> to select a device, then press <+> to move it up, or <-> to move it down the list. Press to exit this menu. Figure 2 Step 3: Set First Boot Device under the Advanced BIOS Features menu to CDROM to boot from CD-ROM after system restarts (Figure 3). CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Advanced BIOS Features • Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Boot Up Floppy Seek Password Check CPU Hyper-Threading # Limit CPUID Max. to 3 No-Execute Memory Protect CPU Enhanced Halt (C1E) CPU Thermal Monitor 2(TM2) CPU EIST Function Init Display First ........: Move Enter: Select F5: Previous Values [Press Enter] [CDROM] [Hard Disk] [CDROM] [Disabled] [Setup] [Enabled] [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] [AGP] +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General HelpF7: Optimized Defaults Item Help Menu Level • Select Hard Disk Boot Device Priority Step 4: Save and exit BIOS Setup. Figure 3 GA-8S661GXM-775(rev. 2.0) Motherboard -66 - English (3) Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create RAID. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press + to enter Setup Menu or to skip waiting" (Figure 4). Hit CTRL+S to enter the RAID BIOS setup utility. If you cannot enter the RAID BIOS correctly, assure that your SATA drives are properly installed. Silicon Integrated Systems Corp. RAID BIOS Setting Utility v1.05_964 (c) 2003-2005 Silicon Integrated Systems Corp. All Rights Reserved. Press to enter Setup Menu or to skip waiting. Primary Master: ST3120026AS 111GB UDMA6 Secondary Master: ST3120026AS 111GB UDMA6 Figure 4 Step 2: Press CTRL+S. The SiS RAID BIOS Setting Utility -Disk Status window appears (Figure 5). To create RAID, press R to enter the RAID Setup utility. SiS RAID BIOS Setting Utility * Current Created Raid * [R] : Enter Raid setup utility Disk Status [Q] : Exit current menu Location Model Disk 1 ST3120026AS Disk 2 ST3120026AS Capacity 111GB 111GB Mode UDMA 6 UDMA 6 RAID Type Single Single Figure 5 -67 -Appendix English Step 3: In the RAID Setup screen, press A if you want to create RAID array (Figure 6). SiS RAID BIOS Setting Utility * Current Created Raid * Press [A] key to create RAID RAID Setup [Q] : Exit current menu Location Model Disk 1 ST3120026AS Disk 2 ST3120026AS Capacity 111GB 111GB Mode UDMA 6 UDMA 6 RAID Type Single Single Figure 6 Step 4: Then, use number keys 1~3 to select a RAID mode: (1)JBOD, (2)RAID 0, or (3)RAID 1 and then press ENTER (Figure 7). The following is an example of RAID 0 creation. SiS RAID BIOS Setting Utility * Current Created Raid * RAID Type : <1> JBOD <2> RAID 0 <3> RAID 1 : RAID Setup [Q] : Exit current menu Location Model Capacity Mode Disk 1 ST3120026AS 111GB UDMA 6 Disk 2 ST3120026AS 111GB UDMA 6 RAID Type Single Single Figure 7 GA-8S661GXM-775(rev. 2.0) Motherboard -68 English Step 5: If RAID 0 is selected, you'll have to decide whether you want the RAID array to be created automatically or manually (Figure 8). Press 1 to select <1> Auto Create or 2 to select <2> Manual Create. (We recommend selecting Auto Create to most users.) SiS RAID BIOS Setting Utility RAID Setup * Current Created Raid* RAID 0 <1> Auto Create <2> Manual Create : 1 [Q] : Exit current menu Location Model Capacity Mode RAID Type Disk 1 ST3120026AS 111GB UDMA 6 Single Disk 2 ST3120026AS 111GB UDMA 6 Single Figure 8 Step 6: When the next message appears, press Y if you wish to proceed to map and stripe all current data and future data to the RAID disks. Otherwise press N to perform striping on future data only. Then press ENTER (Figure 9). SiS RAID BIOS Setting Utility RAID Setup * Current Created Raid * RAID 0 Split the SOURCE (Disk 1) data to RAID disks? N [Q] : Exit current menu Location Model Capacity Mode RAID Type Disk 1 ST3120026AS 111GB UDMA 6 RAID0 Disk 2 ST3120026AS 111GB UDMA 6 RAID0 Figure 9 -69 -Appendix English Upon completion, you should see the RAID array in the Current Created Raid section in the RAID Setup screen (Figure 10). SiS RAID BIOS Setting Utility RAID Setup * Current Created Raid * RAID 0 : Disk 1 Disk 2 Press [D] key to delete RAID [Q] : Exit current ...
