Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Carte mère - GA-8PENXP (6.15 mb)
Carte mère - GA-8PENXP (239.82 kb)
Facilité d'utilisation
Figure 4 Step 2: After you enter the RAID Configuration Utility, a screen similar to that below will appear (Figure 5). Main Menu: The Main Menu in the upper left corner allows you to use the UP or DOWN ARROW key to highlight through choices. Highlight an item that you want to execute and press ENTER. The Create RAID set selection allows user to create a new RAID Set. If there is a previously created RAID set on the hard drives, it is recommended that you back up the data and remove the old RAID set before creating a new RAID set. The Delete RAID set selection allows users to delete an existing RAID set. The Rebuild Mirrored set is used to initiate the copying of data from an existing drive to a replacement drive that has been installed in a RAID 1 set after the failure of one of the members. The Resolve Conflicts is used to automatically find the member drives of a RAID set which has been disrupted (physical drives swapped around, for example) and restore the RAID set to proper operation. .................... Main Menu Hard Drives Properties Function keysHelp Window Figure 5 -5 -SATA Hard Drive Configurations (Sil3112) Ac Step 3: Ae Create RAID set: Select Create RAID set and press ENTER, and then the RAID type selection menu will appear (Figure ¤¤ 6). Use UP or DOWN ARROW key to select a RAID type that you want to create and press ENTER. The options include Striped (RAID 0) and Mirrored (RAID 1). ¤a Figure 6 Step 4: After the selection of a RAID type, select Auto configuration or Manual configuration (Figure 7). If Auto configuration is selected, BIOS will automatically assign RAID member drives and set the chunk size of Striped Sets to 64KB. If Manual configuration is selected, you can manually change the chunk size (from 4K to 128K) and then assign the drives to be used in the RAID array. Figure 7 SATA Hard Drive Configurations (Sil3112) -6 Step 5: After finishing all the settings of a RAID set and press ENTER, the prompt "Are You Sure?" will appear. Press Y to confirm your selection. After the RAID array is created, the lower-left screen will list the RAID set information, including RAID type, chunk size and toal array size (Figure 8). .................... Figure 8 If you want to remove one or more RAID sets, select Delete RAID set item (Figure 9) in Main Menu. Press ENTER and follow the on-screen instructions to delete the RAID set. Figure 9 After completing the configuration, press CTRL+E to exit the RAID Configuration Utility. Now, you can proceed to the installation of the SATA driver and operating system. -7 -SATA Hard Drive Configurations (Sil3112) Ac (4) Making a SATA controller driver disk To install Windows 2000/XP onto a SATA hard disk on the Sil3112 controller successfully, you need Ae to install required driver for the SATA controller during OS installation. Without the driver, the hard drives may not be recognized during the Windows setup process. ¤¤ ¤a First of all, you need to copy the driver for the SATA controller from the motherboard driver CD to a floppy disk. The instructions below explain how to copy the driver. Step 1: Find an available system and insert the motherboard driver CD into the CD-ROM drive. The installation utility will appear automatically. Quit the installation utility first. Step 2: Go to My Computer and right-click the CD-ROM drive icon and select Open (Figure 10). Figure 10 Step 3: Go to the BootDrv folder and look for an executable program named MENU.exe (Figure 11). Figure 11 SATA Hard Drive Configurations (Sil3112) -8 Step 4: Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 12 below will appear. Figure 12 Step 5: Insert an empty floppy disk. If you want to create RAID array(s), press 4 to select the 4)SilRAID item. If you do not want to create RAID array, press 3 to select 3)SiIBASE. Then it will take about one minute to copy the SATA driver from the motherboard driver CD to the floppy disk. Step 6: Press 0 to exit when the procedure is complete (Figure 13). You have copied the SATA driver sucessfully. Figure 13 -9 -SATA Hard Drive Configurations (Sil3112) Ac (5) Installing SATA controller driver during OS installation Now that you have prepared a floppy disk with the SATA controller driver and configured BIOS settings, Ae you are ready to install Windows 2000/XP onto your SATA hard drive with the driver. The following is an example of Windows XP installation. ¤¤ ¤a Step 1: Restart your system to boot from the Windows 2000/XP Setup disk and press F6 as soon as you see the "Press F6 if you need to install a 3rd party SCSI or RAID driver" message (Figure 20). After pressing F6, there will be a few moments of some files being loaded before you see the next screen. Figure 14 Step 2: When a screen similar to that below appears (Figure 15), insert the floppy disk containing the SATA driver and press S. Figure 15 SATA Hard Drive Configurations (Sil3112) -10 Step 3: If Setup correctly recognizes the driver in the floppy disk, a controller menu similar t...
Ce manuel est également adapté pour les modèles :Carte mère - GA-8TRS350MT (313.53 kb)