Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
8SCSI Select y our boot dev ice priority by SCSI. 8CDROM Select y our boot dev ice priority by CDROM. 8ZIP Select y our boot dev ice priority by ZIP. 8USB-FDD Select y our boot dev ice priority by USB-FDD. 8USB-ZIP Select y our boot dev ice priority by USB-ZIP. GA-8STML Motherboard -28 8USB-CDROM Select y our boot dev ice priority by USB-CDROM. 8USB-HDD Select y our boot dev ice priority by USB-HDD. 8LAN Select y our boot dev ice priority by LAN. 8Disabled Select y our boot dev ice priority by Disabled. • Boot Up Fl oppy S eek During POST, BIOS w ill determine the floppy disk driv e installed is 40 or 80 tracks. 360 K ty pe is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks. 8Enabled BIOS searches for floppy disk driv e to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M driv e ty pe as they are all 80tracks. 8Disabled BIOS w ill not search for the ty pe of floppy disk driv e by track number. Note that there w ill not be any w arning message if the driv e installed is 360 K. (Default v alue) -29 -BIOS Setup English EnglishEnglish Integrated Peripherals CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are Integrated Peripherals IDE1 Conductor Cable IDE2 Conductor Cable On-Chip Primary PCI IDE On-Chip Secondary PCI IDE AC97 Audio AC97 Modem USB Controller USB Legacy Support Onboard LAN Function Init Display First Onboard Serial Port A Onboard Serial Port B Serial Port B Mode Onboard Parallel Port Parallel Port Mode oEPP Mode Select ECP Mode Use DMA Game Port Address Midi Port Address Midi Port IRQ [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [AGP] [3F8/IRQ4] [2F8/IRQ3] [Normal] [378/IRQ7] [ECP] EPP1.7 [3] [201] [330] [10] Item Help Menu Lev el • [Auto] Auto-detect IDE cable ty pe [ATA66/100/133] Set Conductor cable to ATA66/100/133(80 pins) [ATA33] Set Conductor cable to ATA33(40 pins) higf: Mov e Enter:Select F5:Prev ious Values +/-/PU/PD:Value F10:Sav e F6:Fail-Safe Defaults ESC:Ex it F1:General Help F7:Optimized Defaults Figure 4: Integrated Peripherals GA-8STML Motherboard -30 • IDE1 Condu ctor Cable 8Auto Will be automatically detected by BIOS. (Default Value) 8ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice and cable is compatible w ith ATA66/100/133). 8ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). • IDE2 Condu ctor Cable 8Auto Will be automatically detected by BIOS. (Default Value) 8ATA66/100/133 Set IDE2 Conductor Cable to ATA66/10/133 (Please make sure y our IDE dev ice and cable is compatible w ith ATA66/100/133). 8ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). • On-Chip Primary PCI IDE When enabled, allow s y ou to use the onboard primary PC I IDE. 8Enabled Enable onboard 1st channel IDE port. (Default v alue) 8Disabled Disable onboard 1st channel IDE port. • On-Chip S econdary P CI IDE When enabled, allow s y ou to use the onboard secondary PC I IDE. 8Enabled Enable onboard 2nd channel IDE port. (Default v alue) 8Disabled Disable onboard 2nd channel IDE port. • AC97 Audio 8Enabled Enable onboard AC'97 audio function. (Default Value) 8Disabled Disable this function. • AC97 Modem 8Enabled BIOS w ill search MC97 Codec. If found, MC97 function w ill be enabled. If no MC97 Codec found, MC97 function w ill be disabled. (Default Value) 8Disabled Disable this function. -31 -BIOS Setup English EnglishEnglish • US B Con troller Disable this option if y ou are not using the onboard U SB feature. 8Enabled Enable USB Controller. (Default v alue) 8Disabled Disable USB Controller. • US B Legac y S upport 8Enabled Enable USB Legacy Support. 8Disabled Disable this function.(Default Value) • Onboar d Lan 8Disabled Disable this function. 8Enabled Enable Onboard Lan Chip function. (Default Value) • Init Dis play Firs t This feature allow s y ou to select the first initation of the monitor display from w hich card, w hen y ou install an AGP VGA card and a PC I VGA card on board. 8PCI Set Init Display First to PCI Slot. 8AGP Set Init Display First to AGP. (Default v alue) • Onboard S er ial Port A 8Auto BIOS w ill automatically setup the port A address. 83F8/IRQ4 Enable onboard Serial port A and using daddress 3F8 , IRQ4. (Default Value) 82F8/IRQ3 Enable onboard Serial port A and using daddress 2F8 , IRQ3. 83E8/IRQ4 Enable onboard Serial port A and using daddress 3E8 , IRQ4. 82E8/IRQ3 Enable onboard Serial port A and using daddress 2E8 , IRQ3. 8Disabled Disable onboard Serial port A. • Onboard S er ial Port B 8Auto BIOS w ill automatically setup the port B address. 83F8/IRQ4 Enable onboard Serial port B and using daddress 3F8 , IRQ4. 82F8/IRQ3 Enable onboard Serial port B and using daddress 2F8 , IRQ3. (Default Value) 83E8/IRQ4 Enable onboard Serial port B and using daddress 3E8 , IRQ4. 82E8/IRQ3 Enable onboard Serial port B and using daddress 2E8 , IR...