Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
IGX Configuration CMOS Setup Utility-Copyright (C) 1984-2010 Award Software IGX Configuration Item Help Menu Level .. Internal Graphics Mode [UMA] UMA Frame Buffer Size [Auto] x Surround View Disabled Onboard VGA output connect [Auto] VGA Core Clock control [Auto] x VGA Core Clock(MHz) 560 ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Internal Graphics Mode Allows you to determine whether to allocate memory for the onboard graphics controller from the system memory. Disabled Disables the onboard graphics controller. UMA Allocates memory for the onboard graphics controller from the system memory. (Default) UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB, 256MB, 512MB. Surround View Enables or disables the Surround View function. This option is configurable only if Init Display First un- der Advanced BIOS Features is set to PEG and an ATI graphics card is installed. (Default: Disabled) (Default: Disabled) Onboard VGA output connect Specifies the graphics display of the onboard graphics output from the D-SUB/DVI-D or D-SUB/HDMI. Auto BIOS automatically determines the primary display port for output, depending on to which port the display device is connected, D-SUB/DVI-D or D-SUB/HDMI. (Default) D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display. VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) VGA Core Clock(MHz) Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is set to Manual. CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. CPU NorthBridge Freq. Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. CPU Host Clock Control Enables or disables the control of CPU host clock. Auto (default) allows the BIOS to automatically adjust the CPU host frequency. Manual allows the CPU Frequency (MHz) item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. CPU Frequency(MHz) Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz. This option is configurable only when CPU Host Clock Control is set to Manual. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCIE Clock(MHz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) PCIe Spread Spectrum Enables or disables PCIe Spread Spectrum. (Default: Disabled) HT Link Width Allows you to manually set the width for the HT Link between the CPU and chipset. Auto BIOS will automatically adjust the HT Link Width. (Default) 8 bit Sets HT Link Width to 8 bit. 16 bit Sets HT Link Width to 16 bit. HT Link Frequency Allows you to manually set the frequency for the HT Link between the CPU and chipset. Auto BIOS will automatically adjust the HT Link Frequency. (Default) x1~x10 Sets HT Link Frequency to x1~x10 (200 MHz~2.0 GHz). Set Memory Clock Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) Memory Clock This option is configurable only when Set Memory Clock is set to Manual. X4.00 Sets Memory Clock to X4.00. X5.33 Sets Memory Clock to X5.33. X6.66 Sets Memory Clock to X6.66. X8.00 Sets Memory Clock to X8.00. DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2010 Award Software DRAM Configuration Item Help Menu Level . DCTs Mode [Unganged] DDR3 Timing Items [Auto] SPD Auto x CAS# latency Auto 9T 9T x RAS to CAS R/W Delay Auto 9T 9T x Row Precharge Time Auto 9T 9T x Minimum RAS Active Time Auto 24T 24T x 1T/2T Command Timing Auto -- -- x TwTr Command Delay Auto 5T 5T x Trfc0 for DIMM1 Auto 110ns 110ns x Trfc2 for DIMM2 Auto -- -- x Trfc1 for DIMM3 Auto -- -- x Trfc3 for DIMM4 Auto -- -- x Write Recovery Time Auto 10T 10T x Precharge Time Auto 5T 5T x Row Cycle Time Auto 33T 33T x RAS to RAS Delay Auto 4T 4T **DCTs Drive Strength** DCT0 DCT1 ProcOdt(ohms) [Auto] 60 [Auto] 60 DQS Drive Strength [Auto] 1.0x [Auto] 1.0x Data Drive Strength [Auto] 1.0x [Auto] 1.0x MEMCLK Drive Strength [Auto] 1.25x [Auto] 1.25x Addr/Cmd Drive Strength [Auto] 1.5x [Auto] 1.5x CS/ODT Drive Strength [Auto] 1.5x [Auto] ...