Log:
Évaluations - 0, GPA: 0 ( )

Instructions Gigabyte, Modèle GA-M68MT-D3P

Fabricant : Gigabyte
Taille : 8.36 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


CPU NB VID Control Allows you to set the CPU Northbridge VID voltage. Auto sets the CPU Northbridge VID voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. CPU Voltage Control Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. Normal CPU Vcore Displays the normal operating voltage of your CPU. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Standard CMOS Features Item Help Menu Level . Date (mm:dd:yy) Fri, Dec. 17 2010 Time (hh:mm:ss) 22:31:24 } IDE Channel 0 Master [None] } IDE Channel 1 Master [None] } IDE Channel 2 Master [None] } IDE Channel 3 Master [None] Halt On [All, But Keyboard] Base Memory 640K Extended Memory 1790M ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) Sets the system date. Time (hh:mm:ss) Sets the system time. IDE Channel 0, 1, 2, 3 Master IDE HDD Auto-Detection, IDE Auto-Detection Press to autodetect the parameters of the SATA device on this channel. IDE Channel 0, 1 Master, Extended IDE Drive Configure your SATA devices by using one of the three methods below: • Auto Lets the BIOS automatically detect SATA devices during the POST. (Default) • None If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. • Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. (For IDE Channel 0, 1 Master only.) Access Mode Sets the hard drive access mode. (Default: Auto) The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive. Cylinder Number of cylinders. Head Number of heads. Precomp Write precompensation cylinder. Landing Zone Landing zone. Sector Number of sectors. Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard" (default), "All, But Diskette," "All, But Disk/Key." Memory These fields are read-only and are determined by the BIOS POST. 2-5 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2010 Award Software Advanced BIOS Features Item Help Menu Level . Virtualization [Enabled] AMD K8 Cool&Quiet control [Auto] CPU Unlock (Note) [Disabled] CPU core Control [Auto] x CPU core 0 (Note) Enabled x CPU core 1 (Note) Enabled x CPU core 2 (Note) Enabled x CPU core 3 (Note) Enabled } Hard Disk Boot Priority [Press Enter] First Boot Device [Hard Disk] Second Boot Device [CDROM] Third Boot Device [USB-FDD] Password Check [Setup] HDD S.M.A.R.T. Capability [Disabled] Away Mode [Disabled] Init Display First [PEG] Frame Buffer Size [Auto] Onboard GPU [Enable If No Ext PEG] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Virtualization Virtualization allows a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. (Default: Enabled) AMD K8 Cool&Quiet control Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce heat output from your computer and its power consumption. (Default) Disabled Disables this function. CPU Unlock (Note) Allows you to determine whether to unlock hidden CPU cores. (Default: Disabled) CPU core Control Allows you to determine whether to manually enable/disable CPU Core 2 and Core 3. Manual allows the two items below to be configurable. Auto Lets the BIOS to enable all CPU cores (number of cores available depends on the CPU being used). Manual Allows you to individually enable/disable CPU Core 2 and Core 3. CPU core 0 (Note) Enables or disables CPU Core 0. (Default: Enabled) CPU core 1 (Note) Enables or disables CPU Core 1. (Default: Enabled) CPU core 2 (Note) Enables or disables CPU Core 2. (Default: Enabled) CPU core 3 (Note) Enables or disables CPU Core 3. (Default: Enabled) Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. (Note) This item appears only when you install a CPU that supports this feature. First/Second/Third Boot Device Specifies the boot order from the available devices. Password Check Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup. After configuring this item, set the password(s) under the Set Su...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories