Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
2-2-6 AMT Configuration Intel AMT Enables/Disables Intel Active Management Technology BIOS Extension. Note! iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device. Options available: Enabled/Disabled. Default setting is Enabled. BIOS Hotkey Pressed Enables/Disables the BIOS Hotkey Press function. Options available: Enabled/Disabled. Default setting is Disabled. MEBx Selection Screen Enable/Disable the MEBx Selection Screenfunction. Options available: Enabled/Disabled. Default setting is Disabled. 2-2-7 H/W Monitor Press Enter to view the Hardware Monitor screen which displays a real-time record of the CPU/system tem perature, and fan speed, Items on this window are non-configurable. CPU/System FAN Fail Detect Enable CPU/System Fan Stop Warning function. Option available: Enabled/Disabled. Default setting is Enabled. CPU/System SMART FAN Control Enable CPU/System Smart Fan function. Option available: Enabled/Disabled. Default setting is Enabled. SYS FAN Type Select system fan type. Option available: 3 Pin/4 Pin. Default setting is 3 Pin. System/CPU Temperature Displays current system and CPU temperature. System/CPU Fan Speed (RPM) Displays current system and CPU and system fan speed. 2-2-8 CPU PPM Configuration EIST (Enhanced Intel SpeedStep Technology) Conventional Intel SpeedStep Technology switches both voltage and frequency in tandem between high and low levels in response to processor load. Options available: Enabled/Disabled. Default setting is Enabled. Turbo Mode When this feature is enabled, the processor can dynamically overclock one or two of its four processing cores to improve performance with applications that are not multi-threaded or optimized for quad-core processors. Options available: Enabled/Disabled. Default setting is Enabled. CPU C3/C6 Report (Note) Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6 state is a more enhanced power-saving state than C1. Options available: Enabled/Disabled. Default setting is Enabled. Default setting for C3 is Enabled. Default setting for C6 is Enabled. (Note) This item is present only if you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. 2-3 Chipset Menu Azalia Enable/Disable onboard audio controller. Options available: Auto/Enabled/Disabled. Default setting is Enabled. Onboard LAN Controller Enable/Disable onboard LAN controller. Options available: Enabled/Disabled. Default setting is Enabled. Launch PXE OpROM policy In case of multiple Option ROMs (Legacy only and UEFI Only) specifies what PCI option ROM to launch. Options available: Do not launch/Legacy only/UEFI only. Default setting is Do not launch. Erp Support Enable/Disable Erp support function. Options available: Enabled/Disabled. Default setting is Enabled. Restore AC Power Loss This option provides user to set the mode of operation if an AC / power loss occurs. Power On: System power state when AC cord is re-plugged. Power Off: Do not power on system when AC power is back. Last State: Set system to the last sate when AC power is removed. Options available: Power On/Power Off/Last State. Default setting is Power Off. 2-4 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the drive(s) specified is not bootable. Boot Configuration Bootup NumLock State Allows you to select power-on state for NumLock function. Options available: On/Off. Default setting is On. Boot Option #1/2/3 Press Enter to configure the boot priority. Hard Drive BBS Priorities Press Enter to configure the boot priority. 2-5 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Adminstrator Password Entering this password will allow the user to access and change all settings in the Setup Utility. • User Password Entering this password will restrict a user’s access to the Setup menus. To enable or disable this field, a Administrator Password must first be set. A user can only access and modify the System Time, System Date, and Set User Password fields. AdministratorPassword Press Enter to configure the Administrator password. User Password Press Enter to configure the user password. Intel ME Function Enable/Disable the Intel ME support function. Options available: Enabled/Disabled. Default setting is Disabled. 2-6 Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Exit Saves changes made and close the BIOS setup and exit system setup. Options available: Yes/No. Discard Changes and Exit Discards ...