Évaluations - 2, GPA: 2
(
)
)
|
Par ce dispositif a également d'autres instructions :
Carte mère - GA-H81M-S1 (8.6 mb)
Carte mère - GA-H81M-S1 (9.32 mb)
Carte mère - GA-H81M-S1 (9.29 mb)
Facilité d'utilisation
..Dual channel memory architecture ..Support for DDR3 1600/1333 MHz memory modules ..Support for non-ECC memory modules ..Support for Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Onboard Graphics ..Integrated Graphics Processor: - 1 x D-Sub port, supporting a maximum resolution of 1920x1200 - Maximum shared memory of 1 GB Audio ..Realtek® ALC887 codec ..High Definition Audio ..2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN ..Realtek® GbE LAN chip (10/100/1000 Mbit) Expansion Slots ..1 x PCI Express x16 slot, running at x16 ..2 x PCI Express x1 slots (The PCI Express slots conform to PCI Express 2.0 standard.) Storage Interface ..Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0/1) - 2 x SATA 3Gb/s connectors (SATA2 2/3) USB ..Chipset: - 2 x USB 3.0/2.0 ports on the back panel - 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) Internal Connectors ..1 x 24-pin ATX main power connector ..1 x 4-pin ATX 12V power connector ..2 x SATA 6Gb/s connectors ..2 x SATA 3Gb/s connectors ..1 x CPU fan header ..1 x system fan header ..1 x front panel header ..1 x front panel audio header ..2 x USB 2.0/1.1 headers ..1 x Clear CMOS jumper Back Panel Connectors ..1 x PS/2 mouse port ..1 x PS/2 Keyboard port ..1 x D-Sub port ..2 x USB 3.0/2.0 ports ..2 x USB 2.0/1.1 ports ..1 x RJ-45 port ..3 x audio jacks (Line In, Line Out, Mic In) I/O Controller ..iTE® I/O Controller Chip Hardware Monitor ..System voltage detection ..CPU/System temperature detection ..CPU/System fan speed detection ..CPU/System overheating warning ..CPU/System fan fail warning ..CPU/System fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. BIOS ..1 x 32 Mbit flash ..Use of licensed AMI EFI BIOS ..PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features ..Support for Q-Flash ..Support for Xpress Install ..Support for APP Center * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications. - @BIOS - EasyTune - EZ Setup - USB Blocker - Smart TimeLock - Smart Recovery 2 ..Support for ON/OFF Charge Bundled Software ..Norton® Internet Security (OEM version) Operating System ..Support for Windows 8.1/8/7 Form Factor ..Micro ATX Form Factor; 22.6cm x 17cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. * Please visit the Support & Downloads\Utility page on GIGABYTE's website to check the supported operating system(s) for the software listed in the "Unique Features" and "Bundled Software" columns. 1-3 Installing the CPU Read the following guidelines before you begin to install the CPU: ••Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) ••Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. ••Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket.) ••Apply an even and thin layer of thermal grease on the surface of the CPU. ••Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage of the CPU may occur. ••Set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals. If you wish to set the frequency beyond the standard specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc. Installing the CPU Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. LGA1150 CPU LGA1150 CPU Socket Notch Notch Alignment Key Alignment Key Pin One Corner of the CPU Socket Triangle Pin One Marking on the CPU Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load plate automatically during the process of re-engaging the lever after you insert the CPU. 1-4 Installing the Memory Read the following guidelines before you begin to install the memory: ••Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) ••Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage. ••Memory modules have a foolproof design. A memory module can be installed in only one direction. ...