Évaluations - , GPA:
(
)
)
Fabricant : Sony
Taille : 1.34 mb
Nom Fichier : 241fa710-ecf1-4fc0-98cb-b553a51fc0da.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
The installation of the software starts. For details on ImageMixer VCD2, refer to the software’s on-line help. Connecting to a Macintosh computer Connecting to a Macintosh computer Other functions Creating a DVD (Direct Access to “Click to DVD”) to i.LINK (IEEE1394) connector i.LINK cable (optional) to DV Interface b Notes • Some models are not compatible for this operation. Regarding supported models, check to see if there is a listing for the Burn DVD feature in the index of the Camera Operations Guide. • You can only use an i.LINK cable for this operation. You cannot use a USB cable. You can create DVDs when you connect your camcorder to a Sony VAIO series computer* that supports “Click to DVD” via an i.LINK cable (optional). The picture is automatically copied and written to a DVD. The following procedures describe how to create a DVD from a picture recorded on a tape. For system and operation requirements, visit the following URL: * Note that you need a Sony VAIO computer equipped with a DVD drive that can be used to write DVDs. You also need the computer with “Click to DVD Ver.1.2” (Sony original software) or later installed. – Europe –USA dvimag/ – Asia Pacific Regional –Korea –Taiwan –China –Thailand – Latin America Using the Direct Access to “Click to DVD” function for the first time The Direct Access to “Click to DVD” function enables you to copy pictures recorded on a tape to a DVD easily if your camcorder is connected to a computer. Before operating the Direct Access to “Click to DVD” function, follow the steps below to start “Click to DVD Automatic Mode Launcher.” 1 Turn on the computer. 2 Click the start menu, then select [All Programs]. 3 Select [Click to DVD] from the programs displayed, then click [Click to DVD Automatic Mode Launcher]. [Click to DVD Automatic Mode Launcher] starts up. z Tips • After you start up [Click to DVD Automatic Mode Launcher] once, from then on it starts up automatically when you turn on your computer. • [Click to DVD Automatic Mode Launcher] is set up for each Windows XP user. 1 Turn on the computer. Quit all applications running with an i.LINK. 2 Prepare the power source for your camcorder, then slide the POWER switch repeatedly to select the PLAY/ EDIT mode. Use the supplied AC Adaptor as the power source since it takes a few hours to create a Other functions DVD. The name of the power switch on the camcorder varies depending on the model. 3 Insert a recorded cassette into your camcorder. 4 Connect your camcorder to a computer via an i.LINK cable (optional). (p. 15) b Note • When you connect your camcorder to a computer, make sure you insert the connector in the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder. 5 For touch panel models, select [BURN DVD] on or of your camcorder. For SEL/PUSH EXEC dial models, press BURN DVD/VCD of your camcorder, then select [DVD] on the [SELECT DISC]. “Click to DVD” starts up and the on-screen instructions appear on your computer. The procedure of the menu setting varies depending on the model. 6 Place a writable DVD in the disc drive of the computer. 7 For touch panel models, select [EXEC] on your camcorder. For SEL/PUSH EXEC dial models, press the dial on your camcorder. BURN DVD START 0:00:00:00 CREATE DVD? EXEC CANCEL The status of the operation on your computer is displayed on the LCD screen of your camcorder. CAPTURING: The picture recorded on the tape is being copied to the computer. CONVERTING: The picture is being converted to the MPEG2 format. WRITING: The picture is being written onto the DVD. b Note • The screen varies depending on the model. z Tip • If you use a DVD-RW/+RW which has other data stored on it, the message [This is a recorded disc. Delete and overwrite?] appears on the LCD screen of your camcorder. When you select [EXEC], the existing data is erased and new data is written. 8 Follow the steps below to finish creating a DVD. For touch panel models Select [ END] or [NO] of your camcorder. For SEL/PUSH EXEC dial models Press BURN DVD/VCD of your camcorder. The disc tray comes out automatically. BURN DVD COMPLETED 0:00:00:00 Create another copy? Disctr ay opens. YES NO To create another DVD with the same content, follow the on-screen instructions, then repeat steps 7 and 8. The disc tray comes out and place a new writable DVD in the disc drive. b Note • The screen varies depending on the model. ,continued Other functions Other functions To cancel the operation For touch panel models Select [CANCEL] on the LCD screen of your camcorder. For SEL/PUSH EXEC dial models Press BURN DVD/VCD of your camcorder. b Notes • You cannot cancel the operation after [Finalizing DVD.] is displayed on the LCD ...