Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
When you turn on the TV, the NeoTV Quick Setup screen displays. Connect to the TV 1. Make sure that your TV is on and set to display the correct video input. 2. Connect an HDMI cable (sold separately) to the HDMI port on your streaming player and to the HDMI IN port on your TV. HDMIcableStreaming playerTV 3. Connect the power adapter to your player, and plug it into an electrical outlet. Remote Control Batteries To use the remote control, remove the battery cover, and insert the two AAA batteries that are included in the box. Connect to Your Home Network To use your player, you need to connect it to your home network with either a wireless or a wired connection. After you get your network ready, the onscreen guided setup helps you connect your player to your network. Wired Connection Use an Ethernet cable (sold separately) to connect your player to a LAN port on your router. RouterEthernet cableStreaming playerTV Figure 1. Wired LAN connection Wireless Connection If you are using a wireless connection, place your player within range of your wireless network. For best wireless reception, avoid enclosing your player in a cabinet. Wireless routerStreaming playerTV Figure 2. Wireless network connection If you do not receive a strong signal during the onscreen setup, rotate your player or move it closer to your router. Reset Button There is a Reset button on the back of the streaming player. Use the Reset button to reset the streaming player to factory default settings. To reset to factory default settings, press and hold Reset for 6 seconds. The streaming player turns off, turns back on, and restores the default settings. Remote Control PowerConfirm/ DownStopRewindNextHome/ BackMenuPlay/PauseRightLeftUpPreviousFast ForwardRed buttonGreen buttonBlue buttonYellow buttonEnterExit ChannelChannelQuick Start Figure 3. Remote control Table 1. Remote control buttons Button Description Power Turns power to the streaming player on and off. Home/Exit Channel Go to the home screen or exit the channel. Up Navigate up. Down Navigate down. Left Navigate left. Right Navigate right OK Confirm or enter. Back Return to the previous menu. Some services do not use this button. Menu Additional options. Some channels do not use this button. Play/Pause Play or pause media. Fast Forward Fast forward. Rewind Rewind. Next Skip to next. Some services do not use this button. Previous Previous movie chapter. Some services do not use this button. Stop Stop playing media. Note: The functions of the color buttons (red, green, blue, and yellow) at the corners of the directional pad depend on the screen that is displayed. Onscreen Quick Setup makes it easy to get started with the streaming player. 1. After you connect your streaming player, press Power on the remote control to turn the streaming player on. 2. You might need to use your TV remote control to select the HDMI input on your TV where you connected the streaming player. The NeoTV Quick Setup Welcome screen displays. 3. Follow the onscreen setup instructions to select the following: • TV resolution. This is the resolution of the output to the TV. • Standby timing. Select the number of minutes that the streaming player waits to display a screen saver when media is not playing. • WiFi network. Select your home network. If you connected an Ethernet LAN cable, you are not prompted to select a WiFi network. You can use one of the following methods. - Select your WiFi network. The streaming player displays a list of networks in your area. Select the one that you want to join. - Connect using WPS. When prompted, press the WPS button on your router to join your network without typing the network password. - Connect manually. Use the onscreen keyboard to type the name of the network and its WiFi password. • Check software update. The streaming player checks for software updates. If an update is found, the streaming player upgrades the software. • Registration. Visit https://my.netgear.com or or scan the QR code on your screen. • Learn about your remote control. Learn more about the remote control, its buttons, and their usage. Then the home screen displays: Figure 4. Streaming player home screen The home screen displays your channel selections in the My Channels category: • To move a channel to another position, select it and press the blue button on the remote control. Use the arrow button on the remote control to go to the new position, and press OK. • To remove a channel from the display, press the red button on the remote control, and press OK. 1. Navigate to a screen such as Most Popular that displays a selection of channels. 2. Use the arrow buttons on the remote control to select a channel that you want to add to My Channels. 3. Press the green button on the remote control. The next time you go to the My Channels screen, the new channel will be included. 1. Select a menu item in the left pane on the home screen. 2. Select the channel, and press OK. Fling Queue i...