Évaluations - 4, GPA: 4.3
(
)
)
|
Facilité d'utilisation
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY 1 Rev. 07/05B GETTING TO KNOW YOUR TWIN MOTOR STAND MIXER 1. High-Low Bowl Speed Selector 2. Mixer Head Release Button 3. On/Off - Beater Speed Selector 4. Power Indicator Light 5. Mixer Head 6. Beater Eject Button 7. Stainless Steel Mixing Bowl 8. Mixing Bowl Base 9. Main Unit 10. Beaters (x2) 11. Dough Hooks (x2) Technical Specifications Voltage: 120V., 60Hz. Power: 480 Watts 'Illustrations may vary from actual product 2 Read all the sections of this booklet and follow all the instructions carefully. OPERATING INSTRUCTIONS Warning: To avoid injury when inserting or removing beaters or dough hooks, always set the speed selector to the “Off” position and unplug the appliance. 1. Before using your mixer for the first time, wash the beaters, dough hooks, and bowl in warm, sudsy water. Rinse and dry thoroughly. Use a damp cloth to wash the mixer base. Dry with a soft cloth. NEVER immerse the mixer in water or any other liquids. 2. Before assembling your mixer, make sure that the power cord is unplugged from the electrical outlet and that the On/Off beater speed control is at the “Off’ position. Attaching the Beaters to the Mixer 1. Ensure that the mixer is not plugged in to an electrical outlet and that the On/Off beater speed selector is on the “Off” position. Press the mixer head release button and tilt the mixer head upwards. (Fig. 1) NOTE: The mixer head will lock in the ‘tilt’ position. 2. Mixer Head Release Button 3. Select the desired attachments depending on the mixing task at hand: Beaters-For creaming butter and sugar, mixing cake and muffin mixes or whisking cream or egg whites. Dough Hooks-For kneading dough, and other heavy mixes. 4. To insert the beaters: take the two beaters, the oval shaped beater (a) is placed in the left socket, of the mixer head, (outer position). Place the beater with the plastic scrapers (b) on the base into the right socket, (inner position). (Fig. Fig. 2 5. To insert the beaters: take the two dough hooks, place the dough hook with the shorter hook at the bottom (a) into the left socket of the mixer head. Then place the longer dough hook (b) into the right socket (inner position) of the mixer head. (Fig. 3) Fig. 3 6. Ensure that both the beaters or dough hooks click firmly into place, if required you can twist the attachments slightly to engage them into position prior to pushing them into the sockets. NOTE: Ensure that the dough hooks are properly inserted into the correct sockets in the correct manner or your mixer or hooks could be damaged. 3 OPERATING INSTRUCTIONS Fitting the Bowl onto the Base Warning: To avoid injury when inserting or removing beaters or dough hooks, always set the speed selector to the “Off’ position and unplug the appliance. 1. Press the mixer head release button, located on the side. While the button is depressed, ease the mixer head back. NOTE: The mixer head will lock in the ‘tilt’ position. 2. Place the mixing bowl onto the metal base so that it is sitting evenly. Lock the bowl into place by turning it clockwise. (Fig. 4) 3. Press the mixer head release button and hold while pushing the mixer head downwards with the selected attachments in place. (Fig. 5) Using the Mixer Warning: To avoid injury when inserting or removing beaters or dough hooks, always set the speed selector to the “Off’ position and unplug the appliance. 1. With the On/Off - beater speed selector in the “Off’ position, plug the power cord into a 120 volt power outlet. NOTE: The power indicator light will now be illuminated. 2. Use the On/Off - beater speed selector to turn the unit on and off and to control the speeds for mixing. (Fig. 6) Power TIP: Start mixing at slow speeds and increase speed gradually to prevent ingredients splashing out of the mixing bowl. When adding dry ingredients, particularly flour, lower the speed temporarily until ingredients are combined. TIP: When kneading yeast doughs, use ‘LOW’ speed to achieve best results. Selecting the Mixing Bowl Speed 1. The mixing bowl automatically turns when the On/Off beater speed selector is turned on. Most tasks will require the ‘LOW speed setting. ^ 2. To select the‘HIGH’bowl speed turn the bowl speed ff selector clockwise towards ‘HIGH’. This setting is best used for maximum performance required for dishes such as meringue, and cakes. NOTE: The mixture passes through the beaters more often yielding faster results. For large volume mixtures the bowl speed should be set at ‘LOW’. 3. When mixing is complete, turn the On/Off beater speed selector to the “Off’ position and unplug the unit. 4 OPERATING INSTRUCTIONS Removing the Beaters/Dough Hooks Warning: To avoid injury when inserting or removing beaters or dough hooks, always set the spe...