Évaluations - 1, GPA: 4 ( )

Fabricant : Bosch Taille : 10.48 mb Nom Fichier : Langue d'enseignement:

• Attach the cover and as far as possible in a clockwise direction. The lug on the blender cover must be fully located in the slot in the blender handle! Blender will not work unless the cover has been attached and locked. • Set the rotary switch to the desired setting. Important information When working, hold the blender cover by the edge. Adding more ingredients • Switch off the appliance with the rotary switch. • Remove the cover and add ingredients or • take out the funnel on the blender cover and gradually add solid ingredients via the feed tube or • pour liquid through the funnel. After using the appliance • Switch off the appliance with the rotary switch. • Pull out the mains plug. • Rotate the blender in a clockwise direction and remove. Tip: It is recommended to clean the blender immediately after use. Cleaning and servicing oaea=cN=EaEAieaA=eUcAa _ENceE=iceaaaO=ca=iUE=~eeaa~aAEI= eiaa=cii=iUE=a~aae=eaiOK Cleaning the base unit oaea=cN=EaEAieaA=eUcAa kEiEe=aaaEeeE=iUE=A~eE=iaai=aa= i~iEe=ce=ea~AE=iaCEe=eiaaaaO=i~iEeK= ac=aci=ieE=~=eiE~a=AaE~aEeK `~iiaca> ac=aci=ieE=~Ae~eaiE=AaE~aaaO= ~OEaieK • Pull out the mains plug. • Wipe the base appliance and protective cover with a damp cloth. If required, use a little washing-up liquid. • Then dry the base unit. Robert Bosch Hausgerate GmbH en Cleaning the bowl and tools Fig. D `~iiaca> ac=aci=iECOE=ea~eiaA=e~eie=aa=iUE= CaeUi~eUEeI=~e=iUEo=AciaC=AE= eEea~aEaiao=CENceaEC=CieaaO=iUE= i~eUaaO=eecAEeeK ensuring that the gearing meshes fully. Clean kneading hook with a brush under running water. If required, use a little washing- – After drying the whisks, re-insert them, – Pull whisks out of the holder. Bowl and double whisk are dishwasher-proof. up liquid. Dismantle double whisk for cleaning. Important information Before cleaning the bowl in the dishwasher, take the drive shaft out of the bowl. • Rotate the bowl and base upwards. • Rotate and remove drive shaft from the fins in an anti-clockwise direction. • Pull out drive shaft. • After drying the parts, re-insert the drive shaft. • Lock drive shaft in position by rotating it in a clockwise direction. Cleaning the blender Fig. E oaea=cN=aaaieo=Neca=eU~ee=Aa~CEe ac=aci=iciAU=Aa~CE=aaeEei=iaiU=A~eE= U~aCeK=`aE~a=iUEa=iaiU=~=AeieUK `~iiaca> ac=aci=ieE=~Ae~eaiE=AaE~aaaO= ~OEaieK ac=aci=AaE~a=Aa~CE=aaeEei=aa=iUE= CaeUi~eUEeK=ac=aci=aE~iE=Aa~CE= aaeEei=aa=i~iEeK It is recommended to clean the blender immediately after use. This will prevent residue from drying on and attacking the plastic (e. g. by essential oils in herbs). • Clean blender jug (without blade insert), lid and funnel in the dishwasher. • Clean blade insert with a brush under running water. Do not leave in water! Tip: Pour water with a little washing-up liquid into the attached blender (approx. half full). Switch on the blender forseveral seconds (setting M). Pour out the water and rinse out the blender with clear water. Troubleshooting oaea=cN=EaEAieaA=eUcAa _ENceE=iceaaaO=ca=iUE=~eeaa~aAE...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :