Évaluations - 4, GPA: 4.5
(
)
)
|
Facilité d'utilisation
If an overload occurs, the driver breaks instead. However, the driver can easily be replaced. Otherwise spare parts with a predeterminedbreaking point are not a component of our warranty obligations. Such spare parts can be purchased from customer service (order no. 753348). Operation Risk of injury! Do not insert mains plug until all preparations for working withthe appliance are complete. • Before operating the appliance andaccessories for the first time, clean thoroughly; see “Cleaning and servicing”. Fig. . • Stow perforated discs in the storagecompartment. • Stow individual parts of the sausage filler attachment and kebbe attachment in the pusher and close the pusher with the lid. Assembling the mincer attachment Fig. . • Take perforated disc with required hole diameter out of the storage compartment. • Insert worm gear into the housing. • Put blade on the worm gear. Blades must face the perforated disc. • Put perforated disc with the required hole diameter on the worm gear. Recess on the perforated disc must be situated on the lug in the housing. • Screw on threaded ring clockwise. Do not tighten the threaded ring too tight. • Disassembly is in reverse order. Use for: – processing raw or cooked meat, bacon, poultry and fish. – Do not process bones! – Process steak tartare through the mincer twice. Robert Bosch Hausgerate GmbH en Assembling sausage filler attachmentNote: The parts of the mincer attachment (without perforated disc and blade) are used. Fig. . • Take nozzle (A) and bearing ring (D) out of the pusher. • Insert worm gear into the housing. • Insert nozzle into the threaded ring. • Put bearing ring on the worm gear andhold in place. Recess on the bearing ringmust be situated on the lug in the housing. • Screw on threaded ring with nozzleclockwise. Do not tighten the threaded ring too tight. • Disassembly is in reverse order. Use for: Filling artificial and natural casings with sausage meat. Assembling kebbe attachment Note: The parts of the mincer attachment (without perforated disc and blade) are used. Fig. . • Take shaper (B) and conical ring (C) out of the pusher. • Insert worm gear into the housing. • Insert shaper into threaded ring. • Put conical ring on the worm gear andhold in place. Recess on the conical ring must be situated on the lug in the housing. • Screw on threaded ring with shaper clockwise. Do not tighten the threaded ring too tight. • Disassembly is in reverse order. Use for: Shaping dough tubes. Operating the appliance Risk of injury Before fitting/removing attachment, wait until thedrive has come to astandstilland pullout the mains plug. Do not reach into the feed tube. Alwaysuse the stuffer to push fooddown the hole. Fig. . • Stand the mincer on a clean, level work surface. • Take power cord out of the cable storage and pull out to the required length. • Put the completely assembled mincer attachment, inclined slightly to the right, on the drive. • Turn mincer attachment upwards until it engages. • Tighten thr...
Ce manuel est également adapté pour les modèles :Meat Grinder - MFW66020/01 (10.23 mb)
Meat Grinder - MFW66020GB/01 (10.23 mb)
Meat Grinder - MFW67440/01 (10.23 mb)
Meat Grinder - MFW67600/01 (10.23 mb)