Évaluations - 3, GPA: 3.7 ( )

Fabricant : Campbell Hausfeld Taille : 96.6 kb Nom Fichier : 0f8b5033-dea6-473f-9506-f6600b07db77.pdf Langue d'enseignement:

Part No. D26052-023-0 BEFORE ASSEMBLY 1. Shut off the pressure washer and turn off the water supply. 2. Pull trigger on gun handle to relieve any water pressure. 3. Disconnect the high pressure hose from the gun. TO ASSEMBLE HOSE REEL 1. Attach handle to flange assembly. NOTE: Screws must be inserted from the inside of hose reel and secured with nuts on the outside as shown. Tighten securely. 2. Remove quick connect plug from high pressure hose. 5. Apply sealant tape to swivel end of high pressure hose. IMPORTANT: The high pressure hose has a swivel end and fixed end. The swivel end must be used to attach high pressure hose to hose reel, see below to determine fixed and swivel ends. If quick connect socket is assembled on swivel end, remove and connect it to fixed end of hose. hose end without swivel hose end with swivel 6. Feed high pressure hose through slot (1) in flange assembly and connect to swivel (2). Tighten securely. 3. Apply sealant tape to hose reel inlet hose and assemble quick connect to hose reel inlet hose. 1 2 7. Make a loop in hose as shown. Place hose into hose clamp (3), squeeze hose clamp together, slide onto long screw post, and secure with nut (4). Tighten securely. NOTE: Do not 4. Bolt hose reel to reel bracket as overbend or kink hose. shown. Tighten securely. NOTE: If unit is not equipped with hose reel bracket order hose reel bracket (part number D23163). 4 3 . 2- ENG 8. Turn handle and reel hose onto 9. Attach hose reel inlet to high pressure reel. pump. 10. Attach high pressure hose to gun. Do not operate this hose reel until you have read and understood the Pressure Washer Owners Manual for Safety, Operation, and Maintenance Instructions. 3- ENG . LIMITED WARRANTY PORTER-CABLE CORPORATION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators, which have the following warranty periods: 3 YEARS - Limited warranty on 2-stage oil-free air compressor pumps that operate at 1725 RPM. 2 YEARS -Limited warranty on oil-lubricated air compressor pumps. 1 YEAR -Limited warranty on all other air compressor components. 2 YEARS -Limited warranty on electric generator alternators. 1 YEAR - Limited warranty on other generator components. 2 YEARS -Limited warranty on pneumatic air tools as described in Porter-Cable general catalog. 1 YEAR -Limited warranty on pressure washers used in consumer applications (i.e. personal residential household usage only). 90 DAY -Pressure washers used for commercial applications (income producing) and service parts. 1 YEAR -Limited warranty on all accessories. Porter-Cable will repair or replace, at Porter-Cable's option, products or components which have failed within the warranty period. Service will be scheduled according to the normal work flow and business hours at the service center location, and the ...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :