Évaluations - , GPA: ( )

Instructions American Dynamics, Modèle AOC 7F-SLK

Fabricant : American Dynamics
Taille : 448.75 kb
Nom Fichier : 3518f5c6-854a-4d39-adb4-413658634f08.pdf

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

AOC 7F-SLK 10 v2_123102 Technical Support (FAQ) AOC 7F-SLK Problem Possible Solution Power LED is not ON • Make sure the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • Confirm that your computer is Plug & Play compatible. • Confirm that your video card is Plug & Play compatible. • Inspect the video cable and make sure that none of the pins are bent. • Make sure the AOC monitor drivers are installed (AOC monitor drivers are available at: Picture is fuzzy • Adjust the Contrast and Brightness settings. Picture bounces or a wave pattern is present in the picture • Move electrical devices away from the monitor. They may be causing electrical interference. Power LED is ON • Press a key on the keyboard or wiggle the mouse to re-activate the monitor. (green or orange light • Make sure the video cable is properly connected to the computer. is ON) but there is no • Inspect the video cable and make sure none of the pins are bent. video or picture. • Make sure your computer is operating correctly by pressing the CAPS LOCKkey and observing whether the CAPS LOCK light turns ON or OFF. Missing one of the primary colors (RED, GREEN, or BLUE) • Inspect the video cable and make sure that none of the pins are bent. • Make sure the video cable is properly connected to the computer. Screen image is not centered or sized properly • Adjust the Horizontal, Vertical or Zoom settings in the OSD window. Picture has color defects (white doesn’t look white) • Adjust the User Color setting in the OSD window. AOC 7F-SLK 11 v2_123102 Appendix AOC 7F-SLK Specifications CRT Size 17.0" (43.2 cm) 11.4” (29 mm) neck 0.25mm(D), 0.21mm(H) dot pitch 90 degree deflection Viewable image size 16.0” (40.6 cm) diagonal Preset Display area 11.8” (300 mm) X 9.1” (230 mm) Dot Clock 110 MHz Maximum Resolution 1280 x 1024 pixels Plug & Play VESA DDC1/2B TM Input Video Red, Green, Blue Analog Interface Separate Sync. H/V TTL H/V Sync. Positive/Negative H-Frequency 30 kHz - 72 kHz V-Frequency 50 Hz -130 Hz Input Video Signal Analog: 0.7 Vpp, 75 OHM, Positive Power Source Universal AC 100 - 240 V 50/60 Hz Factory Preset Mode 6 User Programmable Mode 10 EPA ENERGY STAR® Yes Power Consumption (Maximum) 90 Watts Regulatory Compliance UL, CSA, FDA, FCC, TUV/GS, MPRII AOC 7F-SLK 12 v2_123102 Appendix AOC 7F-SLK Specifications (continued) Environmental Operating Temp: Considerations 32° to 104°F (0° to 40°C) ambient Operating Humidity: 10% to 85% relative, non-condensing Signal Cable Attached Mini D-sub 15 Male Optimal Viewing Mode: 1024 x 768 x 85 Hz AOC 7F-SLK 13 v2_123102 Appendix AOC 7F-SLK Factory Preset Timing Table Standard Resolution (in pixels) Horizontal Frequency Vertical Frequency VGA 720 . 400 31.5 KHz 70 Hz 640 . 480 31.5 KHz 60 Hz VESA / 85 640 . 480 43.3 KHz 85 Hz 800 . 600 53.7 KHz 85 Hz 1024 . 768 68.7 KHz 85 Hz VESA / 60 1280 . 1024 64.0 KHz 60 Hz AOC 7F-SLK 14 v2_123102 Appendix AOC 7F-SLK Connector Pin Assignment Pin Number Description Pin Number Description 1 Red 9 NC 2 Green 10 Ground 3 Blue 11 Monitor Ground 4 Ground 12 DDC-Serial Data 5 Ground 13 H-Sync 6 R-Ground 14 V-Sync / *V-Clk 7 G-Ground 15 DDC-Serial Clock 8 B-Ground * For DDC AOC 7F-SLK 15 v2_123102 Limited 3-Year Warranty AOC 7F-SLK This is a warranty statement for AOC color monitors including those sold within North America as specified. Envision Peripherals, Inc. (EPI) warrants this product to be free from defects in material and workmanship for a period of three (3) years after the original date of consumer purchase. During this period, EPI will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as stated below*. The parts or product that are replaced become the property of EPI. * This limited warranty does not cover any losses or damages that occur as a result of: • Shipping or improper installation or maintenance •Misuse • Neglect • Any cause other than ordinary commercial or industrial application • Adjustment by non-authorized source • Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center • Improper environment • Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities. This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration. All express and implied warranties for the product (including the warranties of merchantability and fitness for a particular purpose) are limited in duration to a period of three (3) years for parts and labor from the original date of consumer purchase. No warranties (either expressed or implied) apply after this period. In the United States, some states do not allow limitations on how long an implied warranty...