Évaluations - 5, GPA: 3.8
(
)
)
|
Facilité d'utilisation
Signal cable connection: firstly lock the base and knighthead, then Plug one end of the signal cable into computer and lock the two bolts to ensure firmly grounding. Then plug the other into the monitor and lock the two bolts. 2. Power cord connection: connect the AC adapter and AC power source with power cord. then connect the AC adapter output to the power input of the monitor. 3. Audio cable connection: Insert one end of the audio cable to the audio output of the PC audio card and the another to the audio input of LCD monitor. 4. Power on: turn on both of the monitor and computer. After the monitor is power on, the LED lights up green or blue, If the LED become red and flashing, please check the video signal cable. If LED is off, please press power on switch. 2.2 Product positioning • Avoid a direct lightening of the monitor by sources of light. To control natural light, is possible to use curtains, better ones of a neutral colour. • The screen should be put aside walls with windows and if you have a window in front of you it must be screened with curtains. • Most used documents should be kept near the monitor in order to have not to turn your head frequently always changing your focus. • Most used objects should be positioned as near as possible, the ones less used can be kept a little further, but they should be easily reachable too. 3.0 Operating instructions 3.1 Front panel controls • Auto Adjust Key: When OSD menu is in off status, press this button direct to activate the Auto adjustment function. The Auto Adjustment function is used to set the Hpos, Vpos, Clock and Focus. This button is the input switch for analog /digital signal while with DVI function. • Brightness : A05-17XM-L0X_MX01 Adjust brightness or adjust function (tone down the volume while have the audio frequency) • Contrast : Adjust contrast or adjust function.(tone up the volume while have the audio frequency) • MENU : Activate the OSD menu or confirm the function adjusting. • Power Key: Press this button to switch ON/OFF of monitor’s power. • Power Indicator: Blue/Green ----Power On mode. Orange/Red ----Off mode. 3.2 How to adjust a setting 1. Press the MENU button to activate the OSD window. 2. Press or to select the desired function, then press the MENU button again. 3. Press or to change the settings of the current function ,press the MENU button to confirm it. 4. If you want to adjust any other function, repeat steps 2-3. 5. If you want to exit the OSD image, select the “exit function/EXIT OSD”, or leave the monitor alone for 20 seconds (Windows default), the OSD window will close and sure automatically. 6. When the OSD window is active, it shows the input signal timing. 3.3 Adjusting the picture 1. BRIGHTNESS 1.1 Auto gain control: Adjust the gain automatically. 1.2 Brightness: Adjust the brightness automatically. 1.3 Contrast: Adjust the contrast automatically. 1.4 Exit 2. COLOR (In the state of DVI without this item) A05-17XM-L0X_MX01 2.1 Auto color: Adjust the color automatically. 2.2 Exit 3. IMAGE (In the state of DVI without this item) 3.1 Auto configuration: Adjust the image position automatically 3.2 Clock: Adjust the image clock. 3.3 Phase: Adjust the image focus 3.4 H-Position: Adjust the image horizontal position 3.5 V-Position: Adjust the image vertical position. 3.6 Exit 4. TOOLS 4.1 OSD Timeout: Control the quit time of quit the OSD menu automatically. 4.2 OSD H-Position: Adjust the horizontal position of OSD menu. 4.3 OSD V.-Position: Adjust the vertical position of OSD menu. 4.4 Volume(with the function of audio frequency): Adjust the volume of the speaker. 4.5 Factory reset: Recall to factory setting 4.6 Exit 5. COLOR TEMP: selection 5000k warm, 6500k standard, 9300k cool. If 5000k,6500k,9300k can’t meet your need, you can use USERDEFINED menu to adjust the red , green and blue to gain the color which you like. 6. LANGUAGE: Choose the language of OSD menu, you can choose English .Czech.Russia.German.Polish etc. 7. ANALOG/DIGITAL (with the function of DVI): Select the right input. 8. EXIT: Exit OSD menu. 4.0 Trouble-Shooting Problem &...
Ce manuel est également adapté pour les modèles :Moniteurs - A05-17BM-L04 (253.84 kb)