Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
(Doing so may cause the speakers to fall off or tip over causing injury and damage.) 3 PLASMA DISPLAY SPEAKER 4 SPE AKE R Please be careful not to stain the speakers with any gas or oil. When assembling, be sure to use the enclosed parts and make sure all parts are tightly screwed as instructed. Do not place the speakers in a humid or dusty place. Do not place the speakers near heating units. Do not place speakers near a humidifier, or cooking pots where speakers will be exposed to steam or smoke. Please be sure to connect (+) inputs and (-) inputs correctly when connecting speakers to plasma display. *PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INSTALLING OR HANDLING (Failing to do so will cause the speakers to vibrate and unable to produce clear sound.) (Doing so will change the outer appearance) (Failing to do so may alter the units) (Failing to do so may cause discoloration or damage to speakers) (If not connected correctly, it may result in distorted sound) (Failing to do so will damage the speakers) Dusty Smoke Steam 3. ASSEMBLING INSTRUCTIONS USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS 1 .Clean the surface with soft, lint-free cloth .Attach the sponge to the side of thewhere sponges will be attached. speaker that will be attached to the plasma display. INSTALLING FIXED BRACKETS TO SPEAKERS Please leave a 5 mm space on the top and bottom when attaching. Do not cover the entire side with the sponge as shown in the picture above. 5mm 5mm 2 Note .Install fixed brackets to speakers before attaching speakers to plasma display. Fixed brackets Sponge-attached side Note Please make sure which side the fixed brackets will be screwed to, considering the left and right side of speakers as shown in the picture to the left. 5 PLASMA DISPLAY SPEAKER 6 SPE AKE R INSTALLING SPEAKERS TO THE PLASMA DISPLAY .Place a protective covering over the surface you will be working on and lay the plasma display as shown below. .Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto the fixed brackets to the squared holes in the back of the plasma display. .Now tightly secure the hooks with the M5 screws. Hooks 3 Note .Please be sure to secure the screws to avoid any shaking or looseness. 7 CONNECTING SPEAKER WIRES .Take the speaker wire(2) and use the red cord to connect to and fro (+) inputs, and use the black cord to connect to and fro (-) inputs. 4 .Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds. .Please retain the left over accessories. Note PLASMA DISPLAY SPEAKER 8 SPE AKE R INSTALLING SPEAKERS TO ITS OWN STAND. CONNECTING SPEAKER WIRES. .Use a coin to secure the special screws (round head screws) tightly. Please be sure to have the vibration absorbent sponge onto the side of the speaker where the stand will be attached. Coin .Take the speaker wires (2) and use the red cord to connect to and fro (+) inpu...
Ce manuel est également adapté pour les modèles :Moniteurs - DP-SP20 (1.19 mb)
Moniteurs - DP-SP22 (1.19 mb)