Évaluations - 2, GPA: 3
(
)
)
|
Facilité d'utilisation
VIDEO Switches the input line to VIDEO. Edge/level operation INPUT SEL. SDI1 Switches the input line to SDI1. Edge/level operation INPUT SEL. SDI2 Switches the input line to SDI 2. Edge/level operation INPUT SEL. YPBPR/RGB Switches the input line to YPBPR/RGB. Edge/level operation INPUT SEL. DVI-D Switches the input line to DVI-D. Edge/level operation SD ASPECT Sets the aspect ratio for SD signal input. (Disabled during HD and PC signal input) Level operation (Short-circuited: 16:9, open: 4:3) SCAN Switches the scan mode between “UNDER” and “NORMAL”. (Disabled during PC signal input) Level operation (Short-circuited: UNDER, Open: NORMAL) R-TALLY*3 Lights the red tally. Level operation (Short-circuited: ON, Open: OFF) G-TALLY*3 Lights the green tally. Level operation (Short-circuited: ON, Open: OFF) MONO Switches between color and monochrome (MONO). (Disabled during PC signal input) Level operation (Short-circuited: monochrome, Open: color) GAMMA SEL. FILM Switches the gamma curve to FILM mode. Level operation (Short-circuited: FILM mode, Open: STANDARD mode) GAMMA SEL. STDIO/ PST Switches the gamma curve to STDIO/PST mode. Level operation (Short-circuited: STDIO/ PST mode, Open: STANDARD mode) SELECT SYNC*4 Selects the SYNC when using YPBPR/RGB-VIDEO input. Level operation (Short-circuited: EXT, Open: INT) PIXEL TO PIXEL Switches screen display between input size and display size. Level operation (Short-circuited: ON, Open: OFF) *1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display, both markers are displayed. *2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by the 16:9 marker is controlled. *3 When “R-TALLY” and “G-TALLY” simultaneously go on, the tally color changes to orange. *4 This is only enabled when “RGB-VIDEO” is selected under “YPBPR/RGB” in the “INPUT SELECT” menu. REMOTE Specifications (continued) ¦ Priority of assigned functions • When both “MARKER1” and “MARKER2” are activated at the same time, “MARKER1” has priority. However, when the display aspect ratio is 4:3, the “MARKER1” aspect ratio is 16:9 and the “MARKER2” aspect ratio is 4:3, “MARKER2” is displayed. In this case, the “MARKER2” background is controlled. • When “MARKER BACK HALF” and “MARKER BACK BLACK” are activated at the same time, “MARKER BACK BLACK” has priority. • During GPI edge operation and two or more of “INPUT SEL. VIDEO”, “INPUT SEL. SDI1”, “INPUT SEL. SDI2”, “INPUT SEL. YPBPR/RGB” and “INPUT SEL. DVI-D” are simultaneously activated, priority goes to the last activated item. During level operation, priority is assigned in the following order: “INPUT SEL. VIDEO”, “INPUT SEL. SDI1”, “INPUT SEL. SDI2”, “INPUT SEL. YPBPR/RGB” and “INPUT SEL. DVI-D”. • When “GAMMA SEL. FILM” and “GAMMA SEL. STDIO/PST” are activated at the same time, “GAMMA SEL. FILM” has priority. RS-232C terminal The following diagram and the table on the lower right show RS-232C terminal pin arrangement and connections. For details on systems using RS-232C, be sure to consult your dealer. PC Side (Straight) BT-LH1760 Side RS-232C terminals (9P) Pin number Signal Pin number Signal 1 N.C. 1 N.C. 2 RXD 2 TXD 3 TXD 3 RXD 4 DTR 4 DSR 5 GND 5 GND 6 DSR 6 DTR 7 RTS 7 CTS 8 CTS 8 RTS 9 N.C. 9 N.C. RS-232C remote control method Pin number Signal Description 1 N.C. Not connected 2 TXD Transmission data 3 RXD Reception data 4 DSR Connected inside 5 GND Ground 6 DTR Connected inside 7 CTS Connected inside 8 RTS Connected inside 9 N.C. Not connected ¦ Connectors and signals ¦ Command format Connector: D-SUB 9-pin (female) Signal STX (02h) Command : Data ETX (03h) • The command is the 3-character string starting with STX and ending with ETX. • Append any data after the colon (:) following the command, as required. ¦ Response formats 1. Setting command response STX (02h) Command ETX (03h) 2. Query command response STX (02h) Data ETX (03h) Signal level RS-232C compliant Synchro system Asynchronous Transfer rate 9600 bps Parity None Data length 8 bit Stop bit 1 bit Flow control None 3. Error response ¦ Communication parameters STX (02h) Error code ETX (03h) Error codes ER001: Invalid command ER002: Parameter error REMOTE Specifications (continued) ¦ Setting command No Command Description Data Response 1 IIS Input switch 0: SDI1 1: SDI2 2: VIDEO 3: YPBPR/RGB 6: DVI-D IIS 2 VPC Image quality adjustment CON00-60 : Contrast settings BRI00-60 : Brightness settings CRO00-60 : Chroma settings PHA00-60 : Phase settings VPC 3 OBO Blue only 0: OFF 1: ON OBO 4 OHV HV Delay 0: OFF 1: H DELAY 2: V DELAY 3: HV DELAY OHV 5 VBL Backlight 00-60: Backlight setting VBL 6 DCH Cross hatch 0: OFF 1: LOW 2: HIGH DCH 7 DSD Status display 0: CONTINUE 1: 3SEC OFF 2: OFF DSD 8 ISM Analog mode ANA0: YPBPR ANA1: RGB-VIDEO ANA2: RGB-COMP. ISM 9 IRF SELECT Sync 0: INT 1: EXT IRF 10 ISM DVI-D mode DVI0: DVI-VIDEO DVI1: DVI-COMP. ISM 11 DMK Marker settings 16:9 marker MK100: OFF MK101: 80% MK10...