Évaluations - , GPA: ( )

Instructions Panasonic, Modèle BTS915DA

Fabricant : Panasonic
Taille : 641.75 kb
Nom Fichier : BTS915DA.PDF

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

0 Press to accept the selection. -9- Selecting the synchronization method (external or internal synchronization) o SYNC INT EXT © Turn to select “SYNC”. (2) Press to enter selection mode. (3) Turn to select “INT” (internal) or “EXT” (external). 0 Press to accept the selection. Turning remote operation on and off ©•© INPUT SELECT LINE A LINE B SYNC VIDEO YPBPR INT REMOTE OFF 4 MAIN MENU REMOTE OFF $ ON © Turn to select “REMOTE”. (2) Press to enter selection mode. (3) Turn to select “OFF” or “ON”. © Press to accept the selection. “OFF”... The aspect can be changed using the ASPECT/STD switch at the front of the set. “ON”... The aspect can be changed using the external switch connected to the REMOTE Jack at the back of the set. REMOTE NOTE • When set to “ON”, the ASPECT switch at the front of the set will not function. I ON (short) 16:9 OFF (open) 4:3 -10- Displaying the OPTION menu MAIN MENU COLOR TEMP COLOR SYSTEM AUTO INPUT SELECT OPTION « MENU OFF OPTION COMPO LEVEL lOO SETUP O BLUE ONLY OFF APERTURE 20 — I H“POSI INPUT DISP TIMEOUT 4 MAIN MENU © Press to display the MAIN MENU screen. 1. Input a SMPTE color bar signal as shown at left, and then follow the procedure above to set BLUE ONLY mode. 2. Use the phase VR to adjust so that c, d, e and f are at the same level. 3. Use the chroma VR to adjust so that a, b, g and h are at the same level. 4. Repeat steps 2 and 3 until a, b, c, d, e, f, g and h are at the same level. 5. The chroma and phase will be set once you exit BLUE ONLY mode. a c e g b d f h SMPTE color bar pattern Adjusting the aperture ©■© OPTION COMPO LEVEL lOO SETUP O BLUE ONLY OFF APERTURE 21 H-POSI APERTURE 21 © Turn to select “APERTURE”.