Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
(G) : Over scan screen (g) : Under scan screen 12 PULSE CROSS switch Checks the retrace period (sync signal) by delaying the input signal. (G) : Normal screen (g) : Retrace period display screen 14 BLUE (blue check) switch Selects the screen mode (normal or monochrome blue screen). Useful when you want to check the chroma and phase adjustment. (G) : Normal screen (g) : Monochrome blue screen Note: * The PHASE adjustment is effective only in the NTSC color system mode. [How to adjust] 1. Select the monochrome blue screen mode and input color bar signals in the order of brightness. 2. Adjust the CHROMA and PHASE controls until the density and brightness of each blue bar are the same. 13 MONO (color off) switch Selects the screen mode (color or B/W). Useful when you want to check the white balance. (G) : Color screen (g) : B/W screen Adjust the blue bars to the same density and brightness. (continued on the next page ) = CONTROLS AND FEATURES (cont'd) Rear < Rear Panel > 22 2524 OUT IN OUTIN S-VIDEO AFC NORMAL FAST OUTIN SERVICE CUT OFF B1 R G DRIVE R G VIDEO A OUTIN EXT SYNC AUDIO TALLY/ REMOTE OUTIN VIDEO B AC IN DC IN 12V 2 2 1 THIS APPARATUS MUST BE EARTHED + - LINE B LINE A WARNING To AC outlet (120 V AC, 50 Hz/60 Hz) 23 15 VIDEO A terminals Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. IN : Video signal input terminal OUT : Bridge-connected video signal output terminal Notes: * For corresponding audio signals, use the AUDIO A terminals *. * Also refer to the Basic Connection Example on page 8. 16 VIDEO B terminals Video signal input (IN) and output (OUT) terminals for both composite and S-VIDEO (Y/C) terminals. Each output terminal is bridge-connected. [BNC terminals] IN : Video signal input terminal OUT : Bridge-connected video signal output terminal [S-VIDEO (mini-DIN 4-pin) terminals] IN : S-VIDEO (Y/C) signal input terminal OUT : Bridge-connected S-VIDEO signal output terminal Notes: * For corresponding audio signals, use the AUDIO B terminals (. * S-VIDEO (Y/C)- terminal has priority. * Also refer to the Basic Connection Example on page 8. . S-VIDEO terminal pin layout 31 IN 4 S-VIDEO 3 OUT 42 2 1 Pin No. Signal 1 GND (Y) 2 GND (C) 3 Y 4 C 19 18 17 16 15 OUT IN OUTIN S-VIDEO NORMAL OUTIN VIDEO A OUTIN EXT SYNC AUDIO OUTIN VIDEO B LINE B LINE A AFC FAST 20 21 TALLY/ REMOTE 17 EXT SYNC terminals External sync signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected. IN : Input terminal for the external sync signal OUT : Bridge-connected output terminal Note: * Also refer to the Basic Connection Example on page 8. 18 AUDIO A terminals Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals %. The output terminal is bridge-connected. IN : Audio input terminal OUT : Bridge-connected output terminal Note: * For corresponding video signals, use the VIDEO A terminals %. 19 AUDIO B terminals Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO B terminals ^. The output terminal is bridge-connected. IN : Audio input terminal OUT : Bridge-connected output terminal Note: * For corresponding video signals, use the VIDEO B terminals ^. 20 AFC switch Selects the AFC (Automatic Frequency Control) time constant for the horizontal sync circuit. Correct the skewed portion of the picture. NORM position : Normal mode FAST position : Fast mode (fast: smaller time constant) < Rear Panel > 22 23 2524 OUT IN OUTIN S-VIDEO AFC NORMAL FAST OUTIN SERVICE CUT OFF B1 R G DRIVE R G VIDEO A OUTIN + LINE A EXT SYNC AUDIO TALLY/ REMOTE OUTIN LINE B VIDEO B AC IN DC IN 12V 2 2 1 THIS APPARATUS MUST BE EARTHED - WARNING To AC outlet (120 V AC, 50 Hz/60 Hz) IN OUT TALLY/ REMOTE 21 AFC NORMAL FAST 22 Power input connector 21 TALLY/REMOTE terminal External control terminal (DIN 8-pin). Tally lamp, VIDEO A/B (input selection), Under Scan, External Sync, 4:3/16:9 (aspect ratio), Pulse Cross, and Color Off modes can be controlled from an external unit. Note: * When you’re controlling the monitor externally via the TALLY/REMOTE terminal, set all corresponding switches on the front panel to the OFF (G) position. (Whichever switch is pressed first has priority so remote switches may not function if the panel switches are ON (g) position.) TALLY/REMOTE terminal pin layout GND Supply power to either the AC IN or DC IN 12 V connector. [AC IN] Connect the provided AC power cord between the AC IN connector and an AC outlet (120 V AC, 50 Hz/60 Hz). [DC IN 12 V] Connect the 12 V DC power plug to the DC IN 12 V connector. Notes: * See your dealer for more information on 12 V DC power supply. * When both AC IN and DC IN connectors are used, the AC input has priority. * The DC power supply does not automatically take over if an AC outlet is unplugged or the AC power is cut off when both AC and DC power supplies are connected. In this case, press the POWER switch to set to OFF, then press it again to turn...