Instructions Panasonic, Modèle BTH1700
Fabricant : Panasonic
Taille : 892.86 kb
Nom Fichier : BTH1700.PDF
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Settings : HIGH/LOW Function : Selects the colour temperature. HIGH : Sets the colour temperature to D93. LOW : Sets the colour temperature to D65™. Item : BLUE DRIVE Adjustment range : MIN ~ 000 ~ MAX (in 127 grades) Function : Adjusts the blue drive level. Item : RED DRIVE Adjustment range : MIN ~ 000 ~ MAX (in 127 grades) Function : Adjusts the red drive level. Item : GREEN CUTOFF Adjustment range : MIN ~ 000 ~ MAX (in 255 grades) Function : Sets the green cut-off point. Item : BLUE CUTOFF Adjustment range : MIN ~ 000 ~ MAX (in 255 grades) Function : Sets the blue cut-off point. Item : RED CUTOFF Adjustment range : MIN ~ 000 ~ MAX (in 255 grades) Function : Sets the red cut-off point. Item : sub menu Adjustment range/ Settings : Same as BLUE DRIVE, RED DRIVE, GREEN CUTOFF, BLUE CUTOFF and RED CUTOFF. Function : Performs BLUE DRIVE, RED DRIVE, GREEN CUTOFF, BLUE CUTOFF or RED CUTOFF settings in a single-line display. The sub menu display varies depending on the selected item. Item : reset Function : Sets the BLUE DRIVE, RED DRIVE, GREEN CUTOFF, BLUE CUTOFF and RED CUTOFF values to factory-preset ones. 4. SIZE/POSI. ADJ. Adjusts the size or position of the picture. Press the :00 button to display the setting :00 :00 menu illustrated on the right. :00 H.SIZE H.POSITION V.SIZE V.POSITION sub menu resetEXIT:MENU ADJUST:- + SELECT: Item : H.SIZE Adjustment range :–20 ~ 00 ~ +20 ( * ) Function : Adjusts the horzitontal screen size. – : Reduces the screen size horizontally. + : Enlarges the screen size horizontally. * : Reduced to 00 ~ +20 during the under-scan mode. Item : H.POSITION Adjustment range :–20 ~ 00 ~ +20 Function : Adjusts the horzitontal screen position. – : Move the screen to the left. + : Move the screen to the right. Item : V.SIZE Adjustment range :–20 ~ 00 ~ +20 Function : Adjusts the vertical screen size. – : Reduces the screen size vertically. + : Enlarges the screen size vertically. Item : V.POSITION Adjustment range :–20 ~ 00 ~ +20 Function : Adjusts the vertical screen position. – : Move the screen up. + : Move the screen down. Item : sub menu Adjustment range/ Settings : Same as H.SIZE, H.POSITION, V.SIZE and V.POSITION. Function : Performs H.SIZE, H.POSITION, V.SIZE or V.POSITION settings in a single-line display. The sub menu display varies depending on the selected item. Item : reset Function : Sets the H.SIZE, H.POSITION, V.SIZE and V.POSITION values to factory-preset ones. ENGLISH 5. DISTORTION ADJ. Compensates the picture distortion. Press the button :00 to display the setting menu :00 :00 illustrated on the right. :00 PINCUSHION PIN.BALANCE PARALLELOGRAM TRAPEZOID sub menu resetEXIT:MENU ADJUST:- + SELECT: Item : PINCUSHION Adjustment range :–20 ~ 00 ~ +20 Function : Compensates pincushion picture distortion. – : Expands both left and right sides of the picture. + : Squeezes both left and right sides of the picture. Item : PIN.BALANCE Adjustment range :–20 ~ 00 ~ +20 Function : Adjusts the compensation balance of the pincushion picture distortion. – : The picture is expanded on the left side, and squeezed on the right side. + : The picture is squeezed on the left side, and expanded on the right side. Item : PARALLELOGRAM Adjustment range :–20 ~ 00 ~ +20 Function : Compensates parallelogram picture distortion. – : Moves the upper side of the picture to the right, and the lower side to the left. + : Moves the upper side of the picture to the left, and the lower side to the right. Item : TRAPEZOID Adjustment range :–20 ~ 00 ~ +20 Function : Compensates trapezoid picture distortion. – : Enlarges the upper side of the picture. + : Reduces the upper side of the picture. Item : sub menu Adjustment range/ Settings : Same as PINCUSHION, PIN.BALANCE, PARALLELOGRAM and TRAPEZOID. Function : Performs PINCUSHION, PIN.BALANCE, PARALLELOGRAM or TRAPEZOID settings in a single-line display. The sub menu display varies depending on the selected item. Item : reset Function : Sets the PINCUSHION, PIN.BALANCE, PARALLELOGRAM and TRAPEZOID values to factory-preset ones. 6. STATUS DISPLAY Makes the status of the input signal appear or disappear on the screen. Press the STATUS DISPLAY 1080/1035 :ON :1080 button to display the setting menu illustrated on the right. EXIT:MENU ADJUST:- + SELECT: Item : STATUS DISPLAY Settings : ON/OFF Function : Makes the format name appear or disappear when signals are input and the signal status appear or disappear when the input signal is changed. ON : The information is displayed. OFF : The information is not displayed. Item : 1080/1035 Settings : 1080/1035 Function : Makes the number of effective scanning lines appear or disappear when the HDTV signal is input. 1080 : Sets the number to 1080. (Select when the digital HDTV signal is input.) 1035 : Sets the number to 1035. (Select when the analogue HDTV signal is input.) 7. CONTROL LOCK Item : CONTROL LOCK Settings : OFF/ON Function : Invalidates most of operations on th...
)
