Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
detergent 8 Connections Connecting the Antenna Cable to the Antenna Terminal ANT ANT UHF Antenna Antenna Terminal (ANT or VHF/UHF) VHF Antenna Mixer 75 Ohm Coaxial Cable Coaxial Antenna Plug Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. Incoming 75 Ohm Cable from Home Antenna / Cable Company Note: Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for its compatibility requirements. Antenna / Cable Connection Antenna cover removal and fitting Removal 1 2 1.Grasp the cover at the bottom end and initially remove by pulling slightly toward yourself. 2.Slowly pull out in the downward direction. CT-L1400 1 2 Removal 1.Grasp the opening and initially pull the cover slightly towards yourself to disengage the claws (at 2 points on both the left and right). 2.Slowly pull out in the downward direction. CT-L2000 ANT (VHF/UHF) on the Back of the TV F-Type Antenna Adapter (not supplied) Note: To avoid interference appearing on the screen, do not bundle the antenna wire and AC adapter wire together. Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company. Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.) 2 1 1.Insert the claws (at 4 points) at the top end. 2.Push the claws in (at 4 points) at the bottom end. 1.Insert the claws (at 4 Fitting points) at the top end. 2.Push the claws in (at 4 points) at the bottom 2 end. 1 Fitting Connections Antenna Connection (Cable Box, no VCR) Use this configuration when connecting the TV to a cable TV system using a Cable Box. Antenna Connection (Cable Box, and VCR) ANT ANT Connect the cable from the Output terminal on the back of the Cable Box to the ANTENNA terminal on the back of the TV. CABLE BOX TERMINALS ON THE BACK OF THE CABLE BOX Incoming Cable from Antenna or Cable TV System OUTPUT INPUT ANTENNA TERMINAL (ANT or VHF/UHF) ON THE BACK OF THE TV Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR. ANT ANT OUTPUT S VIDEO VIDEO L-AUDIO-R Connect the cable from the Antenna Output terminal on the back of the VCR to the Antenna terminal (ANT or VHF/UHF) on the back of the TV. Connect the cable from the Output terminal on the back of the Cable Box to the Antenna Input terminal on the back of the VCR. ANTENNA TERMINAL (ANT or VHF/UHF) ON THE BACK OF THE TV VCR CABLE BOX OUTPUT INPUT TO VCR Connect the cable from the antenna or cable system to the Input terminal on the back of the CABLE BOX. ANT OUTPUT ANT INPUT TERMINALS ON THE BACK OF THE CABLE BOX Incoming Cable from Antenna or Cable TV System Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4, cable. This does not apply when signal is input from VIDEO INPUT. Connections How to connect the input terminals Connect VCR and other peripheral equipment (DVD/STB) Audio COMPONENT VIDEO OUT L OUTR Y Pb Pr ANTDC IN 15V L R AUDIO 1 INPUT VIDEO S-VIDEO L R AUDIO 2 VIDEO S-VIDEO L R AUDIO COMPORNENT VIDEO INPUT VIDEO PB Y PR L R AUDIO 1 INPUT VIDEO S-VIDEO L R AUDIO 2 VIDEO S-VIDEO L R AUDIO COMPORNENT VIDEO INPUT VIDEO PB Y PR S-VIDEO cable VIDEO AUDIO (Super-VHS VCR) Audio OUTR L S-Video OUT Video OUT VIDEO AUDIO Connect the S-VIDEO or VIDEO Terminal. Notes: (1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal. (2) Similar connections are available at the INPUT terminals. Select the desired VIDEO input position by pushing the TV/VIDEO button. (See page 14) (3) When connecting VCRs, priority is given to the S- Video cable when the S- Video input terminal and the video input terminal are connected at the same time. Connections Connect CAMCORDER and VIDEO GAME CONSOLE ANT DC IN 15V L R AUDIO 1 INPUT VIDEO S-VIDEO L R AUDIO 2 VIDEO S-VIDEO L R AUDIO COMPORNENT VIDEO INPUT VIDEO PB Y PR L R AUDIO 1 INPUT VIDEO S-VIDEO L R AUDIO 2 VIDEO S-VIDEO L R AUDIO COMPORNENT VIDEO INPUT VIDEO PB Y PR Audio OUTL R S-Video OUT Video OUT COMPONENT VIDEO cable VIDEO GAME CONSOLE Audio OUTL R S-VIDEO cable VIDEO cable AUDIO cable COMPONENT VIDEO OUT AUDIO cable VIDEO GAME CONSOLE CAMCORDER Notes: •When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input terminal are connected at the same time. •Please make inquiries to the VIDEO GAME PLAYER manufacture concerning component cables to connect with video games. Connections Cable cover removal and fitting Removal Fitting 1 2 1.Disengage the claws at the 1 2 1.Insert the claws (at 2 points) uppermost end. at the bottom. 2.Slowly pull out in the 2.Push in the TOP. upward direction. Note: Depending on the type of cable used it may not be possible t...
Ce manuel est également adapté pour les modèles :Moniteurs - CTL2000 (1.16 mb)