Évaluations - 4, GPA: 4.5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
The product may not stay in place when installed on plaster or wood. Components Only use the components and accessories shipped with the product. Wall Bracket(l) Hinge(Left 1, Right Plastic Screw Screw Anchor 1) Hanger (A)(11) (B)(4) (11) (4) Wall Bracket Assembly IS Note There are two hinges(left and right). Use the correct one. 1. Insert and tighten the Captive Screw in the direction of the arrow. 25 Introduction When done, mount the wall bracket on the wall. e There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length. N i t d L» A - Length between the two locking holes 3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. 26 Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. A Notice • Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. • Be careful when installing the product on the bracket as fingers can be caught in the holes. • Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation. 3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product. 27 Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD B - Wall C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2 before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. Note You can adjust the bracket angle between -2° and 15° 28 Introduction Make sure to use the top center, and not the left or the right side of the product to adjust the angle. 29 Connections Connecting a Computer AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. 0 Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Turn on the power switch. 0 There are several ways to connect the computer to the monitor. Choose one from the following options: 61 Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI port on the back of your LCD Display and the DVI port on the computer. 30 Connections CSV Using the HDMI (digital) output on the graphics card. • Connect the HDMI IN port on the monitor to the HDMI port on the PC using the HDMI cable. • When the HDMI cable to the PC, ensure that you select HDMI from both the Source List and Edit Name before selecting PC or DVI device so that normal PC screen and sound can be outputted. • Note that sound is only available when connected according to the option 2 that follows. О Connect the audio cable for your LCD Display to the audio port on the back of the LCD Display. I Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. Connecting TV ®Note You may view television programs on the LCD Display if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer. 31 Connections 1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the LCD Display. Using a TV antenna cable (sold separately). • When using an interior antenna terminal: Check the antenna terminal on the w...
Ce manuel est également adapté pour les modèles :Moniteurs - 400CXN-2 (8.61 mb)
Moniteurs - 460CX-2 (8.61 mb)
Moniteurs - 460CXN-2 (8.61 mb)