Évaluations - 2, GPA: 5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
/ .] > [ENTER] Changes the Position of the PIP window. 6) Transparency [MENU] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] Adjusts the Transparency of PIP windows. -High - Medium -Low -Opaque Note • If you select in Size, Position and Transparency will not be activated. Available Modes: PIP ON Edit Name , , [MENU] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] Name the input device connected to the input jacks to make your input source selection easier. 1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component 7) HDMI Picture [PC / BNC /DVI Mode] Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicBright™ [MENU] > [. / .] > [ENTER] > [ENTER] > [. / .] > [ENTER] MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright™ control button. 1) Entertain High brightness For watching motion pictures such as a DVD or VCD. 2) Internet Medium brightness For working with a mixture of images such as the text with graphics added. 3) Text Normal brightness For documentations or work involving a lot of text. 4) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable for your eyes depending on your taste. If this is the case, Adjusts the brightness and contrast by using the OSD menu. [The direct button on the remote control is the 'M/B' button.] Custom [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [ENTER] > [. / .] / [< / >] > [ENTER] By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 1) Contrast Adjusts the Contrast. 2) Brightness Adjusts the Brightness. Note • By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Color Tone [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] The color tones can be changed. 1) Off 2) Cool 3) Normal 4) Warm 5) Custom (Available in PC, BNC mode only) Note • If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled. • If you set the Color Tone to Off, the Color Control function is disabled Color Control [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [ENTER] > [< / >] > [ENTER] Adjusts the individual R, G, B color controls. (Available in PC, BNC mode only) 1) Red 2) Green 3) Blue Note • If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode. Color Temp [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [< / >] > [ENTER] Color Temp is a measure of the 'warmth' of the image colors. (This function is only enabled if the Color Tone is set to Off.) Brightness Sensor [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [< / >] > [ENTER] Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness. 1) On 2) Off Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. (Available in PC, BNC mode only) 1) Coarse [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [ENTER] > [< / >] > [ENTER] Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. 2) Fine [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] >[ENTER] > [< / >] > [ENTER] Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). 3) Position [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] >[ENTER] > [< / >] / [. / .]> [ENTER] Adjusts the screen location horizontally and vertically. Auto Adjustment [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC, BNC mode only) [The direct button on the remote control is the 'AUTO' button.] Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. (Available in PC, BNC mode only) 1) Signal Balance [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [ENTER] > [. / .] > [ENTER] Selects either On or Off with the signal control. 2) Signal Control [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [< / >] > [ENTER] Adjusts the Gain and Sharpness manually. Size [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] The Size can be switched. 1) 16:9 2) 4:3 PIP Picture [MENU] > [. / .] > [ENTER] > [. / .] > [ENTER] > [. / .] > [ENTER] >...
Ce manuel est également adapté pour les modèles :Moniteurs - 460DX (4.13 mb)