Évaluations - 1, GPA: 3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
2) Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display. Note • Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control. • Then, start the Camcorders with a tape inserted. Note • The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting a DTV Set Top Box Note • The connections for a typical Set Top Box are shown below. 1) Connect a Component cable between the BNC / COMPONENT IN - PR, Y, PB port on the LCD Display and the PR, Y, PB jacks on the Set Top Box. 2) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the LCD Display or on the remote control. Note • For an explanation of Component video, see your Set Top Box owner's manual. Connecting Speakers Note • Fasten the SET and the speaker using the screws. * Mount the speaker set without the speaker stand. Note • Connect the speaker connection cable between the speaker connection jack on the back of the SET and the speaker connection jack on the back of the speaker. Note • Do not move the SET while the SET is connected to the speakers. The speaker-bracket for connecting the SET speaker my become damaged. Connecting to an Audio System Note • Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT [L-AUDIO-R] on LCD Display. Connecting to a Wired Remote Control Note • You can control your monitor by allowing it to receive the remote control signals of other devices through the REMOTE OUT terminal. • You can control a device by allowing it to receive remote control signals from other devices through the REMOTE IN terminal. Note • Restrictions: Available only if other devices support the wired remote control I/O terminals. Connecting HDMI Note •Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. Note •You cannot connect a PC to the HDMI IN terminal. Connecting Using a DVI to HDMI Cable 1)Connect the DVI output terminal of a digital output device to the HDMI IN terminal of the monitor using a DVI to HDMI cable. 2)Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the HDMI / PC / DVI-D AUDIO IN terminal of the monitor. Connecting a LAN Cable 1) Connect the LAN cable. Connecting a USB device 1) You can connect USB devices such as a mouse or keyboard. Using a USB Holder When using a small external device such as a portable memory stick and it is connected to the USB terminal at the back of your monitor, it is exposed to the possiblity of theft or loss. By installing a USB holder after the installation of an external device, you can prevent theft or loss. 1) Insert part of your USB holder into the groove in part at the back of your monitor. 3) Insert a screw into the groove aligned in step [2], and fasten it. Align with and use a screw to fix them. © 1995~2007 SAMSUNG. ALL Rights Reserved 2)Align part of your USB holder with the groove at the bottom of part at the back of your monitor. Align part of your USB holder with the bottom of part at the back of your monitor. 1) Insert part of your USB holder into the groove in part at the back of your monitor. 3) Insert a screw into the groove aligned in step [2], and fasten it. Align with and use a screw to fix them. © 1995~2007 SAMSUNG. ALL Rights Reserved 2)Align part of your USB holder with the groove at the bottom of part at the back of your monitor. Align part of your USB holder with the bottom of part at the back of your monitor. Safety Instructions Introduction Connections Using the Software Installation MagicNet MDC MagicNet Adjusting the LCD Display Troubleshooting Specifications Information Appendix Select Language Main Page Model The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement. Using the Software Installation MagicNet Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicNet installation file. 3. When the InstallShield Wizard window appears, click "Next." 4. Select "I agree to the terms of the license agreement" to accept the terms of use. 5. You are required to log in to the MagicNet Server program. Please enter the password to login. The password cannot be changed when you are logged in. 6. Choose a folder to install the MagicNet program. 7. Click "Install." 8. The "Installation Status" window appears. 10. When the installation is complete, the MagicNet executable icon appears on your des...
Ce manuel est également adapté pour les modèles :Moniteurs - 400DX (8.29 mb)
Moniteurs - 400DXN (8.29 mb)
Moniteurs - 460DXN (8.29 mb)