Évaluations - 4, GPA: 4
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
In this case, adjust the screen quality of your TV by configuring the HDMI black level. 1. Normal 2. Low Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ] Note When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode. Video Wall MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> ENTER > [Video Wall ] > , > ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > ENTER > [Format] Adjusting the LCD Display > , > ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > ENTER > [Horizontal] > , > ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > > ENTER > [Vertical] > , > ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > > > ENTER > [Screen Divider] Adjusting the LCD Display The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Divider. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. • The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off. MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] Pixel Shift Pixel Shift MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > ENTER > [Pixel Shift] > ENTER > [Pixel Shift] > , > ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the LCD are moved in horizontal or vertical direction. 1. Off 2. On Note The Pixel Shift is not available when Video Wall is On. Adjusting the LCD Display Horizontal Dot MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > ENTER > [Pixel Shift] > > ENTER > [Horizontal Dot] > , > ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > ENTER > [Pixel Shift] > >> ENTER > [Vertical Line] > , > ENTER Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > ENTER > [Pixel Shift] > >>> ENTER > [Time] > , > ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > ENTER > [Timer] > ENTER > [Timer] > , > ENTER Adjusting the LCD Display You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. 1. Off 2. On Mode MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > ENTER > [Timer] > > ENTER > [Mode] > , > ENTER You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > ENTER > [Timer] > > > ENTER > [Period] > , > ENTER Use this function to set the execution period for each mode set in the timer. Time Adjusting the LCD Display MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > ENTER > [Timer] > > > > ENTER > [Time] > , > ENTER Within the set period of time specify a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec Scroll MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > > ENTER > [Scroll] This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > > >ENTER > [Bar] This function prevents after-images on the screen by moving long black and white vertical lines. Eraser Adjusting the LCD Display MENU > >>>ENTER >[Setup] >>>> > > > >ENTER > [Safety Screen] > > > > >ENTER > [Eraser] This fu...
Ce manuel est également adapté pour les modèles :Moniteurs - 400TS-2 (3.15 mb)
Moniteurs - 400TSN-2 (3.15 mb)