Évaluations - 4, GPA: 4.5
(
)
)
|
Photos et spécifications Samsung OL46B |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Remote Control Enable or disable the remote control. [2 Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time. ft Edit Column Select the items you want to display in the list of sets. ft Information View the program information. Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. Multiple HiipUy fonhvl a [2E2*1 — a x e O '■“"d Sytfom Tool Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group>Edit in the display device list section on the left side of the program window. 2 In the Edit Group window displayed, click Add on the sub level or Add on the same level. • Add on the sub level: Create a sub-group under the selected group. Add on the same level: Create a group on the same level as the selected group. The Add on the same level button is enabled only If at least one group Is created. 3 Enter the group name. Deleting Groups 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Delete. 3 Click Yes. The group will be deleted. Renaming Groups 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear. 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. • Device Group: Select a group. • Date&Time □ Instant Execution: Run the schedule immediately. □ Timer Set the date, time and interval to run the schedule. • Action: Select a function that will activate at the specified time and interval. Schedule Modification To modify a schedule, select the schedule and click Edit. Deleting a Schedule To delete a schedule, select the schedule and click Delete. Troubleshooting Guide Issue Solution The display you want to control does not appear on the system information chart. Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision. Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu.) For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99. The display you want to control does not appear on the other Control Info Grids. Check that the display is powered on. (See the power status in the system information chart.) Ensure you select the input source the display is connected to. The following message appears repeatedly. Check that the display you want to control is selected. Displays power on or off at different time from one another even though On Time or Off Time is set. Adjust the time on the PC to synchronize the time between the connected displays. The remote control does not work. The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote Control function is Disable. To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. Adjusting the LCD Display Input Available Modes • □ PC / DVI / DisplayPort • Eav • E Component • HDMI • m MagicInfo c" I Note Magiclnfo can only be enabled when a network box(sold separately) is connected. Source List E .........!■■■ 1 PC & □ DVI AV Component HDMI1 DisplayPort Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI1 6. HDMI2 - Enabled if a network box is c...