Évaluations - 2, GPA: 5
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Do not insert metal objects such as utensils, wire or drill bits, orthings that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. • This may cause malfunction, an electric shock or a fire. • Always contact the Service Center if foreign substances/objects enter into the monitor. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time. Be careful when adjusting the stand angle. • Applying too much force may cause the monitor topple over or fall, resulting in injury. • Your hand or finger(s) may get caught between the monitor and the stand, causing injury. Adjust the resolution and frequency to the levels appropriate forthe model. • Inappropriate levels of resolution and frequency may damage your eyesight. 15 inch - 1024 x 768 17,18 and 19 inch - 1280 x 1024 17 inch wide - 1280 x 768 21 inch - 1600 x 1200 24 inch - 1920 x 1200 Keep all power adaptors apart. • Possible fire hazard. Keep power adaptor away from any other heat source. • Possible fire hazard. Remove and discard vinyl bag from power adaptor before use. • Possible fire hazard. Always keep power adaptor in well-ventilated area. Keep the volume at a proper level when you use the headphones. • Excessively loud volume levels may damage hearing. Keep a proper distance between your eyes and the monitor screen. • Sitting too close to the monitor on a continuous basis may damage eyesight. English > Main > Introduction > Unpacking Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Front Rear D-Sub Cable Quick Setup Guide DVI Cable Warranty Card (Sold separately) (Not available in all locations) Monitor Power Cord User's Guide, Monitor Driver, Natural Color software, MagicTune software and Pivot Pro software Installation CD BRACKET DC-Adapter VESA Mounting Bracket English > Main > Introduction > front Unpacking Front Rear Unpacking Front Rear 1. Power indicator This light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments. 2. Power button Use this button to turn the monitor on and off. Use this button to Auto adjustment feature. Use this button to change input source. Change input source : Keep the Power button pressed for two seconds with a "beep" and then release the button to convert the input signal source into analog or digital format. Auto adjustment : Keeping the Power button pressed for three seconds will activate the Auto Adjustment feature with two "beep". Note: See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. English > Main > Introduction > Rear Unpacking Front Rear (The configuration at the back of the monitor may vary from product to product.) your monitor. 1. Power port Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. DVI port Connect the DVI Cable to the DVI Port on the back of your Monitor. 3. D-Sub port Connect the signal cable to the 15-pin, D-Sub connector on the back of Note: See Connecting Your Monitor for further information regarding cable connections. Connecting Your Monitor Installing the Monitor Driver Installing VESA compliant mounting English > Main > Setup > Connecting Your Monitor Setup-General 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connecting to the PC. 2-1) Using the D-Sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-Sub connector on the back of your monitor. 2-2) Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI Port on the back of your Monitor. 2-3) Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-Sub connection cable. 2-4) In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor. 3. Turn on your computer and monitor. If your monitor displays an image, installation is complete. You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-Sub and DVI cables to one computer. If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press Power Button to have the monitor double-check the input signal source. English > Main > Setup > Installing the Monitor Driver Connecting Your Monitor When prom...
Ce manuel est également adapté pour les modèles :Moniteurs - 173P (2.35 mb)