Évaluations - , GPA: ( )

Instructions Samsung, Modèle 320P

Fabricant : Samsung
Taille : 4.2 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Par ce dispositif a également d'autres instructions :

Moniteurs - 320P (4.67 mb)

Moniteurs - 320P (4.56 mb)

• The selection will be set up by pressing a number in the selected mode.. • 2*2 • 3*3 • 1*5 • 5*1 3) On / Off -Turns the Video Wall function of the selected display On/Off. 4) Format -The format can be selected to see a divided screen. ..Full • Natural The Maintenance Control function is only available for displays where the power is ON. The Input source of MagicNet works only for the MagicNet model. 12. Troubleshooting 1. The display you wish to control does not appear in the Power Control Info Grid. -Check the RS232C connection. (Check if it is properly connected to the Com1 port) -Check the displays to see if any of the other displays connected have the same ID. If more than one display has the same ID, those displays are not properly detected by the program due to data conflict. -Check if the Display Set ID is a value between 1 and 10. (Adjust using the Display menu) A Display Set ID must be a value between 1 and 10. If the value is out of the range, the MDC system cannot control the display. 2. The display you wish to control does not appear in the other Control Info Grids -Check to see if the display power is ON. (You can check this in the Power Control Info Grid) -Check if you can change the input source of the display. 3. The dialogue box appears repeatedly. -Check to see if the display you wish to control is selected. 4. Both On Timer and Off Timer have been set but a different time is shown. -Apply the current time to synchronize the display clocks. 5. The remote may not function properly when turning off the remote function, disconnecting the RS-232C cable, or exiting the program in an Irregular manner. Rerun the program and turn on the remote function again to restore normal functions. This program may malfunction due to problems in the communication circuits or interference from electronic appliances nearby. 13. Settings Value Display In Multiple Display Mode When there is more than one display connected, the settings values are displayed as follows. 1. No selection: Displays the Factory Default Value. 2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select All: Returns to the Factory Default Value. Natural Color Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images. For more information, refer to Help (F1) in the software program. Installing the Natural Color Software Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural Color screen will appear. Click on Natural Color in the startup window to install the Natural Color software. To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the Windows [Start] button, select [Run...]. Enter D:\color\NCProSetup.exe and then press the key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.) Uninstalling the Natural Color Software Program Select "Settings" / 'Control Panel" from the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the [Add/Delete] button. Model Input Available Modes : PC / BNC / DVI : AV : S-Video : Component OSD Description Play Source List Use to select PC, BNC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is the 'SOURCE' button. PIP turns off when the monitor is switched to an external source. 1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component PIP When external A/V devices such as VCRs or DVDs are connected to the monitor, PIP allows you to watch video from those devices in a small window super-imposed on the PC Edit Name Name the input device connected to the input jacks to make your input source selection easier. 1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component Edit Name Name the input device connected to the input jacks to make your input source selection easier. 1) PC 2) BNC 3) DVI 4) AV 5) S-Video 6) Component 1) PIP 2) Source 3) Swap 4) Size 5) Position 6) Transparency Video signal. (Off/On) More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal. 1) PIP - The direct button on the remote control is 'PIP' button. Off On : Turns the PIP Screen Off/O...