Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
(Refer to Connecting the Monitor) Check the volume level. Check the volume level. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. * To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows™ is XP); Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Monitors > After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. Download the latest program. The program can be downloaded Reboot the computer after installing the program for the first time. If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. You need to reboot the computer for it to operate normally after installing or removing the program. Visit the MagicTune™ website and download the installation software for MagicTune™ MAC. Check the following items if there is trouble with the monitor. Symptom The screen does not appear when I switch to the Client Mode. The client screen appears, but I cannot connect to the server. Solutions When booting up, it takes about 30 seconds for the networking functions to be activated and no screen is displayed for about 3 to 4 seconds. Wait 30 seconds after the power is turned on, and try to switch modes again. If the operating system does not boot up due to damage to Windows or a blue screen is displayed, download the Windows XPe OS from this site and recover your operating system with it : 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not, that indicates that the LAN connection is disconnected. In this case, connect using another LAN cable. 2) Check if the settings of the 'Settings', 'Network' tab are properly set up. The default setting is "DHCP". If your network uses a static IP address, select 'Use the following IP address' and then enter the appropriate IP address information. 3) Check if the 'User Name' and 'Password' set in the 'Remote Desktop' tab of 'Settings' are the same as those of the host PC. If not, match the 'User Name' and 'Password' of the 'Remote Desktop' with those of the host PC. I cannot access the 1) Check if the Hub port LED to which the LAN cable is connected blinks. If not, Internet in the that indicates that the LAN connection is disconnected. In this case, connect Client screen. using another LAN cable. 2) Check if the settings of the 'Network' tab of 'Settings' have been properly set up. The default setting is "DHCP". If your network uses a static IP address, select 'Use the following IP address' and then enter the appropriate IP address information. The contents This is because the data is transmitted over the LAN. Check your LAN (video, voice) on connection status. the server do not play smoothly on the Client Monitor. I have connected a This model supports USB devices that support removable disk functions without digital device such an additional driver installation. Check if the device you want to connect to is a as a digital camera, device that supports the removable disk function without an additional driver camcorder or USB installation. memory to the USB port, but they do not work. The file list does 1) Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG) not appear. exist, the files do not appear on the screen. 2) The time required to display is determined by the size of the file. Wait a moment. 3) Check if the format of the file is supported by the Client Monitor. If the extension of the file has been changed, the file will not be played. Check the following items if there is trouble with the monitor. Check if the power cord and the video cables are properly connected to the computer. Check if the computer beeps more than 3 times when booting. (If it does, request an a service for the main board of the computer.) If you installed a new video card or if you assembled the PC, check if the installed the adaptor(video) driver and the monitor driver. Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.) If you have problems in installing the adaptor (video) driver, boot the computer in Safe Mode, remove the Display adaptor at the "Control Panel > System > Device Administrator" and then reboot the computer to reinstall the adaptor (video) driver. If problems repeatedly occur, contact an authorized service center. Q & A Question Answer How can I change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on t...
Ce manuel est également adapté pour les modèles :Moniteurs - 911NT (5.56 mb)