Évaluations - 1, GPA: 4
(
)
)
|
Photos et spécifications Samsung C24A650X |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
2 Press [ ] to change the input source for the product to Wireless. 362 Using "HUB Monitor" 2 2 Using "HUB Monitor" 3 Double-click the "Wireless Display Manager" icon created on the desktop. The following screen will appear. Five levels of signal intensity are available. All the five signal intensity indicator bars, including the green bar, will be lit when the strongest signal is received. The weakest signal intensity will turn on the red bar only. The following "Found New Hardware Wizard" screen may appear when the product attempts to connect to a PC via Wireless USB. Proceed with installation following the instructions displayed. 4 Double-click the HUB Monitor to open the following screen. If a connection is established between the product and PC, [ ] will appear over the signal intensity bars as shown below and the product will display the PC screen. If [ ] does not appear, the connection is not established between the product and PC. 372 Using "HUB Monitor" 2 2 Using "HUB Monitor" 5 Right-click on Connected Monitor to display the context menu as shown below. • Disconnect: Disconnect Wireless between the product and PC. • Set as default: Give first priority to the product to connect to the PC once a Wireless signal is detected. A star will appear beside the monitor icon if the product is set as the default monitor. • Rename: Customize the name of the connected monitor. The program will automatically activate to allow you to use the Wireless USB connection even when the "Wireless Display" window is closed. Automatic/manual Wireless USB connection Set Auto Wireless Detection to On under HUB in the on-screen display menu. A Wireless USB connection will automatically be established if the product is within 70cm from the PC. The first priority will be given to a Wireless USB connection even when the product is in power-saving mode or is connected to another input source (Analog/HDMI/USB). The Connecting to PC… message will be displayed while connection is attempted. To establish a Wireless USB connection when Auto Wireless Detection is set to Off, press [ ] to switch to Wireless USB mode. The Connecting to PC… message will be displayed while connection is attempted. Deactivating the Wireless USB mode will automatically restore the previous mode. 382 Using "HUB Monitor" 2 2 Using "HUB Monitor" 2.3.2 Connecting to a PC via the USB Cable Connect the USB cable to [ ] on the back of the product and USB [ ] on the PC. A USB 2.0 cable can be used to connect the product to a PC. However, the PC should support USB 3.0 for the USB 3.0 function to work fully. Connecting to a PC using the USB cable 1 Connect a desktop PC to the product using the USB cable. 2 Press [ ] to change the input source for the product to USB mode. 3 The product will display the PC screen if the connection is established. Automatic/manual USB cable connection The input source will automatically change to USB mode if a USB cable connects to the product and a PC. The USB mode will be given top priority even when the product is in power-saving mode or is connected to another source (Analog/HDMI). If the input source does not switch to USB mode automatically, press [ ] to switch to USB mode. • Top priority will be given to Wireless USB mode if the product is connected to Wireless USB and a USB cable at the same time. • Disconnecting the USB cable will automatically restore the previous mode. 392 Using "HUB Monitor" 2 2 Using "HUB Monitor" 2.4 Utilizing "HUB Monitor" HUB Monitor is only available when the product is connected to a PC via Wireless USB or a USB cable. 2.4.1 Using the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/ output ports available. The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC. • The product is compatible with a USB 2.0 cable. However, your PC should support USB 3.0 for the HUB function to work fully. • If you experience a communication problem with a PC that provides the USB 3.0 function, download and install the latest driver version from the PC manufacturer. Using the Product as a USB HUB WIRELESS LAN ADAPTER If multiple source devices are connected to the PC, the many cables around the PC may look messy. Connecting the devices directly to the product will resolve such inconvenience. • To detect and start a source device faster, connect the device to the blue USB 3.0 port on the back of the product. • An external mass-storage HDD requires external power supply. Be sure to connect it to a power source. 402 Using "HUB Monitor" 2 2 Using "HUB Monitor" WIRELESS LAN ADAPTER Connect a mobile IT device such as an MP3 player or smart phone to the product when connected to a PC. This allows you to use the device fr...