Évaluations - 1, GPA: 3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Prohibited Do not disassemble Do not touch Important to read and understand at all times Disconnect the plug from the outlet Grounding to prevent an electric shock Power When not used for extended periods of time, set your computer to a screen saver. If the same image is present for long periods of time, Phosphor Burnt can be occured, or the screen may be blurred. • Do not use a damaged or loose plug. This may cause an electric shock or fire. • Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. • Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. • Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. • Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. This may cause an electric shock or fire. • Do not connect too many extension cords or plugs to an outlet. This may cause fire. • Do not disconnect the power cord while using the monitor. A surge may be caused by the separation and may damage the monitor. • Do not use the power cord when the connector or plug is dusty. If the connector or plug of the power cord is dusty, clean it with a dry cloth. • Using the power cord with a dusty plug or connector may cause an electric shock or fire. • Installation Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monitor. • Do not drop the monitor when moving it. This may cause damage to the product or human body. • Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. Dropping the product may cause damage to the product or personal injury. • Set down the monitor carefully. • The monitor could be damaged or broken. Do not place the monitor face down. The CDT surface may be damaged. • Do not use the monitor without the monitor stand. It could break down or cause fire due to bad ventilation. • If the monitor must be used without the supplied stand, take steps to insure proper ventilation. • When installing the product, make sure to keep it away from the wall (more than 10cm/4inch) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. • Keep the plastic packaging (bag) out of children’s reach. The plastic packaging (bag) may cause suffocation if children play with it. • Clean When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-diluted mild detergent. (Some detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using. Do not spray water or detergent directly on the monitor. Use the recommended detergent with a smooth cloth. You may prevent the coated CDT from being damaged or the monitor cabinet from being dissolved, cracked or discolored. • • You may buy a recommended detergent at any Samsung Service Center. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. • Others Do not remove cover (or back). This may cause an electric shock or fire. • Refer servicing to qualified service personnel. • If your monitor does not operate normally -in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. This may cause an electric shock or fire. • Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. • Do not set a glass of water, chemicals or any small metal objects on the monitor. This may cause damage, electric shock or fire. • If a foreign substance gets into the monitor, disconnect the plug and then contact a service center. • For each hour of looking at the monitor, you should let your eyes rest for 5 minutes. This will reduce eye fatigue. • Watching the monitor continuously at a too close angle may result ineyesight damage. Do not use or store inflammable substances near the monitor. This may cause an explosion or fire. • Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. • Do not move the monitor right or left by pulling only the wire or thesignal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. • Never insert anything metallic into the monitor openings. This may cause an electric shock, fire or injury. • Keep the monitor away from...
Ce manuel est également adapté pour les modèles :Moniteurs - 591S (5.04 mb)
Moniteurs - 783DF (5.04 mb)
Moniteurs - 790DF (5.04 mb)
Moniteurs - 793DF (5.04 mb)