Évaluations - 3, GPA: 4.7
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Restore all factory default settings except "LANGUAGE." Press the , buttons to reset immediately. NOTE ■ If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. On Screen Display(OSD) Selection and Adjustment i You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. E1940T/E2040T/E2240T/E2340T E1940S/E2040S/E2240S/E2340S MONITOR SETUP raw мхе лито миг MONITOR SETUP 13 El mw MODE АШО EXIT Press the MODE Button, then the main menu of the OSD appears. Menu Name Icons MODE ►/♦ENGINE *1 4» ■ NORMAL MOVIE INTERNET DEMO Sub- menus ■ EXIT Exit Adjust (Decrease/Increase) ■ T Select another sub-menu ■ t Restart to select sub-menu Button Tip NOTE ■ OSD (On Screen Display) menu languages on the monitor may differ from the manual. И On Screen Display(OSD) Selection and Adjustment MOVIE Select this when you are watching a video or movie. INTERNET Select this when you are working on the document (Word etc.) DEMO This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. ■ Exit: Exit •4 , •: Move ■ : Restart to select sub-menu On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description ORIGINAL RATIO MODE ^ ORIGINAL RATIO n - WIDE ORIGINAL WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than monitor ratio (16:9). ■ Exit: Exit M , •: Move ■ : Restart to select sub-menu On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description И PHOTO EFFECT MODE ► PHOTO EFFECT m [SI NORMAL 1 1 m GAUSSIAN SEPIA BLUR ■ MONOCHROME NORMAL The PhotoEffect function is disabled. GAUSSIAN This menu changes the screen to be more BLUR colorful and smoother. SEPIA This menu changes the screen to be Sepia tone (brown color). MONOCH This menu changed the screen to be -ROME Gray tone(black-and-white Picture) . ■ Exit: Exit , -: Move ■ : Restart to select sub-menu Troubleshooting Check the following before calling for service. No image appears • Is the power cord of the display connected? • Check and see if the power cord is connected properly to the power outlet. • Is the power indicator light on? • Press the Power button. • Is the power indicator blinking? • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • Do you ...
Ce manuel est également adapté pour les modèles :Moniteurs - E1940S-PN (5.65 mb)
Moniteurs - E1940T (5.65 mb)
Moniteurs - E1940T-PN (5.65 mb)
Moniteurs - E2040S (5.65 mb)