|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
When using a D-Sub signal input cable connector forMacintosh Varies according to model. Connect the signalinput cable and tightenit up by turning in thedirection of the arrow as shown in the figure. 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power Button NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjuststhe display to optimal settings for individual input signals. ‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press theAUTO function button to improve resolution. 9 Control Panel Functions Front Panel Controls E1941T/E2041T/E2241T/E2341T/E2441T E1941S/E2041S/E2241S MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. 10 Control Panel Functions Control Panel Functions SUPER ENERGY Use this button to enter SUPER ENERGY SAVING SAVING Button menus.For more information, refer to page 16. AUTO Button AUTO IMAGE ADJUSTMENT AUTO button on the MONITOR SETUP OSD. ) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E1941T/E1941S : 1366 x 768 E2041T/E2041S : 1600 x 900 E2241T/E2241S/E2341T/E2441T : 1920 x 1080 INPUT Button Use this button to turn the display on or off. Power Button & Power Indicator When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. (Only E1941T/E2041T/E2241T/E2341T/E2441T ) (SOURCE Hot key) Exit the OSD(On Screen Display). EXIT Button The power indicator stays blueif the display is running properly (On Mode). If the display is in Sleep Mode,the power indicator is blinking blue. 11 2 e n . s. / / . n 1 2 3 4 On Screen Display(OSD) Selection and Adjustment On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB DVI-D : D-SUB(Analog signal) input : DVI-D(Digital signal) input Main menu Sub-menu Supported input Description MENU BRIGHTNESS DSUB DVI-D To customize the screen status for a user's operating environment To adjust the brightness of the screen To adjust the contrast of the screen To adjust the image size To customize the color of the screen ORIGINAL RATIO COLOR TEMP (PRESET/USER) CONTRAST LANGUAGE FACTORY RESET SUPER ENERGY S...
Ce manuel est également adapté pour les modèles :Moniteurs - E1941S-BN (4.88 mb)
Moniteurs - E2041S (4.88 mb)
Moniteurs - E2041S-BN (4.88 mb)
Moniteurs - E2041T (4.88 mb)