Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter problems such as blurred letters, blurry screen, cut-off screen display or tilted screen. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. A17 Troubleshooting Display image is incorrect . The screen color is mono or abnormal. . The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Have you installed the display driver? . Have you installed the display driver? . Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. A18 Specifications W1942SM NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.285*0.285 mm pixel pitch Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1440 x 900 @ 75 Hz Recommend VESA 1440 x 900 @60 Hz DDC 2AB On Mode : 38W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Without Stand Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches Height 38.33 cm / 15.09 inches 30.07 cm / 11.84 inches Depth 19.84 cm / 7.81 inches 6.32 cm / 2.49 inches Net 4.1 kg (9.11 lbs) Tilt -5.~ 20. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type A19 Specifications W2042SM Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 20.1 inches (51.11 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.258*0.258 mm pixel pitch Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz DDC 2AB On Mode : 42W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 47.39 cm / 18.66 inches Height 39.04 cm / 15.37 inches Depth 19.84 cm / 7.81 inches Net 4.5 kg (10 lbs) Tilt -5.~ 20. AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Without Stand 47.39 cm / 18.66 inches 31.89 cm / 12.56 inches 6.29 cm / 2.48 inches NOTE Information in this document is subject to change without notice. A20 Specifications W2242SM Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating 22 inches viewable 0.282*0.282 mm pixel pitch Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz DDC 2AB On Mode : 42W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 51.57 cm / 20.30 inches Height 41.80 cm / 16.46 inches Depth 20.94 cm / 8.24 inches Without Stand 51.57 cm / 20.30 inches 34.46 cm / 13.57 inches 6.31 cm / 2.48 inches Net 4.65 kg (10.33 lbs) Tilt -5.~ 20. AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidi...
Ce manuel est également adapté pour les modèles :Moniteurs - L1954SM-PFS (1.23 mb)
Moniteurs - W2242SM (1.23 mb)
Moniteurs - W2242SM-BF (1.23 mb)
Moniteurs - W2042SM-SF (1.23 mb)