Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 3.96 mb Nom Fichier : Langue d'enseignement:

I, ., I, i, OK Navigation or cursor keys 6. MENU 7. P +/Program up or down 8. ” +/Volume up or down For advanced information about the remote control, see Section 5.1 Remote control over view. EN-6 EN-7 EN 3 Get started This section helps you position and install the TV Monitor and supplements the information provided in the Quick Start Guide. DDNote Refer to the Quick Start Guide for stand mounting instructions. 3.1 Position the TV Monitor In addition to reading and understanding the safety instructions in Section 1.1, consider the following before positioning your Product: • The ideal viewing distance for watching TV is three times its screen size. • Position the Product where light does not fall on the screen. • Connect your devices before you position your Product. • Your Product is equipped with a Kensington Security Slot at the back. If connecting an anti-theft Kensington lock (not supplied), position the Product within reach of a permanent object (such as a table) that can be easily attached to the lock EXT 3 DIGITAL AUDIO OUT 3.2 Wall mount the TV Monitor BBWARNING Wall mounting of the TV Monitor should only be performed by qualified installers. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting that results in accident or injury. Step 1 Purchase a VESA-compatible wall bracket Depending on the size of your TV Monitor screen, purchase one of the following wall brackets: TV Monitor screen size (inches/cm) VESAcompatible wall bracket type (millimeters) Special instructions 22”/55.9cm Fixed 100 x 100 None 19”/48.4cm Fixed 100 x 100 None Step 2 Remove the stand DDNote These instructions are only applicable to TV Monitor models with mounted stands. If your stand is not mounted, skip to Step 3 Connect cables. 1. Carefully place the TV Monitor face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen. 2. Using a cross-head screwdriver (not supplied), unscrew the four bolts that secure the stand to the Product. (19” has four bolts, 22” has three bolts) EN-8 3. Firmly pull the stand from the bottom. Place both the stand and bolts in a secure location for future reinstallation. Step 3 Connect cables Connect the antenna cable, mains cord and all other devices to the back of the TV Monitor as described in the following sections. Step 4 Secure the VESA-compatible wall bracket BBWARNING Only use the bolts (M4 for all models) and spacers (4cm) to secure the VESA-compatible wall bracket to your TV Monitor. The bolts (not supplied) are designed to match the weight of your Product; spacers (not supplied) are designed for easy cable management. DDNote Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESAcompatible wall bracket documentation for instructions. 1. Locate the four mounting nuts at the back of the Product. 2. Align the plate/bracket to the four mounting nuts, placing the spacers between the plate/bracket and the mounting nuts. 3. Using a spanner, insert the bolts through the plate/bracket and spacers, tightly securing the bolts to the mounting nuts. x4 4. Continue with the instructions provided with your VESA-compatible wall bracket. 3.3 Connect the antenna cable 1. Locate the TV ANTENNA connector at the back of the TV Monitor. 2. Connect one end of an antenna cable (not supplied) to the TV ANTENNA connector. Use an adaptor if the antenna cable does not fit. 3. Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tightly secured at both ends. 3.4 Connect the mains cord B WARNING Verify that your mains voltage corresponds with the voltage printed at the back of the TV Monitor. Do not insert the mains cord if the voltage is different. To connect the mains cord D Note: The location of the mains connector varies according to TV Monitor model. 1. Locate the AC IN mains connector at the back or on the bottom of the Product. 2. Connect the mains cord to the AC IN mains connector. 3. Connect the mains cord to the mains, ensuring that the cord is tightly secured at both ends. EN EN-9 EN-10 3.5 Manage cables Route your mains cord, antenna cable and all other device cables through the cable holder (1) at the back of the TV Monitor. 1 3.6 Insert the remote control batteries 1. Slide the battery cover off the back of the remote control. 2. Insert the two supplied batteries (Size AAA, Type LR03). Be sure the + and - ends of the batteries line up with the markings inside the case. 3. Slide the cover back into position. DDNote Remove the batteries if not using the remote control for an extended period of time. 3.7 Switch on the TV Monitor The first time you switch on, check that the mains cord is properly connected. When ready, then press POWER on the side. DDNote Certain models require you to press and hold POWER for up to two seconds. Your TV Monitor may take up to 15 seconds to star...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :