Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
There are the types of bright dot defects: One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels (one white pixel) A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 200W6 1 lit subpixel 3 or fewer 2 adjacent lit subpixels 1 or fewer 3 adjacent lit subpixels (one white pixel) 0 Distance between two bright dot defects* 15 mm or more Total bright dot defects of all types 3 or fewer BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 200W6 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer 3 adjacent dark subpixels 0 Distance between two black dot defects* 15 mm or more Total black dot defects of all types 5 or fewer TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 200W6 Total bright or black dot defects of all types 5 or fewer Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant RETURN TO TOP OF THE PAGE Your LCD Monitor : • Front View Product Description • Accessory Pack • Setting Up and Connecting Your Monitor • Getting Started • Optimizing Performance • VESA Standard Mounting Setting Up and Connecting Your Monitor Accessory Pack Unpack all the parts. Power cord VGA signal cable USB cable PC audio cable (lime) Mac adaptor (optional) EDFU pack DVI cable RETURN TO TOP OF THE PAGE Connect to PC Connect the power cord, DVI and audio cable to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation.) If you use an Apple MacintoshTM, you need to connect the special Mac adapter to one end of the monitor signal cable. Connect the cables to the back of your computer by following these steps: (a) Turn off your computer and unplug its power cord. (b) Connect the VGA or DVI cable to the video connector. (c) Connect the audio cable. (d) Plug the power cord of the computer and the monitor into a nearby outlet. (e) Turn on your computer and monitor. If the monitor displays an image, installation is complete. Connect to Earphone RETURN TO TOP OF THE PAGE Your LCD Monitor : • Front View Product Description • Accessory Pack • Setting up and connecting your monitor • Getting Started • Optimizing Performance VESA Standard Mounting 1) Place monitor face down on a safe surface. 2) Remove the cable cover. 3) Remove the base cover. 4) Unscrew the 5 screws at the base. 5) VESA mounting holes RETURN TO TOP OF THE PAGE Your LCD Monitor : • Front View Product Description • Setting Up and Connecting Your Monitor • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/XP and the Plug & Play application can be activated. The installation procedure based on Windows® '95 OEM Release 2 , 98 , Me, XP and 2000 is specified as follows. For Windows® 95 1. Start Windows® '95 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Have Disk...'. 6. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 7. Click on the 'OK' button then select your monitor model and click on 'OK'. 8. Click on the 'Close' button. For Windows® 98 1. Start Windows® 98 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Next' 6. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want.' then click on 'Next' and then cli...