Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Setup Attach the stand of the TFT monitor as illustrated. Carry out this step before connecting the monitor. (Ill.: Installation of the monitor stand) Take the TFT monitor down as shown in the drawing. Taking down the base of the monitor (Ill. similar) Preparation of your PC You may have to make some preparations if you have been operating a tubed monitor on your computer up to now. This will be necessary if your current monitor has been operated with settings that are not supported by your new TFT screen. The screen will represent up to 1366 x 768 scanning elements. This resolution corresponds to the physical resolution. TFT screens achieve complete image quality with the physical resolution. The display will not appear on the whole area of the screen, under certain circumstances, if you change to a representation with deviating settings. Distortions can also appear in the representation, particularly in the case of lettering. Set a resolution and image frequency on the PC supported by both monitors, using the old monitor, before you connect the new monitor. Shut down the PC and connect the new monitor. You will be able to adjust the screen settings on the E53020 (MD 20281) as described after restarting. Supported monitor settings This TFT monitor supports the following modes. VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1360 x 768 @ 60Hz VESA 1366 x 768 @ 60Hz* MAC 640 x 480 @ 67Hz MAC 832 x 624 @ 75Hz MAC 1152 x 870 @75Hz *Recommended resolution (physical) Bringing the device into operation Monitor settings under Windows XP You will make the screen setting in ‘Display Properties’ in the Windows program under Windows XP. The program can be started as follows: . Right mouse-click on the Windows interface (Desktop) and left mouse-click on „Characteristics“. or . Double-click on the “Display” icon in “System Control”. . .. DE EN FR ES DK NL (Ill.: Display properties) Set the resolution under “Screen resolution” (.). You can set the depth of colour (number of the colours represented) under “Colour quality” (.). Your TFT monitor will support a depth of colour of a maximum of 16 million colours, which corresponds to 32 bits or ‘Real Color’. The image refresh frequency can be set under “Expanded” (.). A Window with the characteristics of your graphics card will appear, according to the configuration of your computer. You will be able to set the required value in the “List all modes” field under “Graphics card“. The optimal value lies at 60 HZ in the case of a TFT monitor. 75 Hz can be set as a maximum. (Ill.: Detail of Display Characteristics) Important! You will possibly not receive any images if your setting does not correspond to the values supported by your display unit. In this case, reconnect your CRT monitor and set the applicable values in correspondence with the options specified above under “Display properties”. 7 English Monitor settings under Windows Vista® You will make the screen settings in ‘Personalize appearance and sounds’ Windows program under Windows Vista®. The program can be started as follows: . Right mouse click on the Windows interface (Desktop) and left mouse click on ‘Personalize’. or . Through Start • Control Panel • Personalize appearance and sounds by a double click with the left mouse button. (Ill.: Personalize appearance and sounds) . Open the Display Settings Menu, to adjust the resolution and the frequency. Monitor settings under Windows® 7 Make the screen settings in the ‘Appearance and Personalization’ Windows program under Windows® 7. The program can be started as follows: . Right mouse click on the Windows interface (Desktop) and left mouse click on ‘Personalize’ or . Through Start • Control Panel • Appearance and Personalization by a double click with the left mouse button. (Ill.: Appearance and Personalization) . Select the Display • Adjust screen resolution Menu, to adjust the resolution and the frequency. Bringing the device into operation Connections on the back DE EN FR ES DK NL 1 2 3 4 (Ill.: Rear of the monitor) 1. Power supply (POWER IN) 2. 3.5 mm stereo jack audio connection (AUDIO IN) 3. Mini 15-pin D-sub connection (VGA) 4. Intake device for protection against theft (Kensington lock) Connecting the monitor . Ensure that the TFT monitor has not yet been connected to the electricity supply (mains plug not yet plugged in) and that neither the TFT monitor nor the computer has been switched on. . Prepare your computer for the TFT monitor if necessary, so that the correct settings for it will be present. 1 Connect signal cable . Plug the signal cable into the appropriate VGA connections on the computer and the TFT monitor. 2 Connect audio cable . Plug the audio cable into the appropriate audio sockets on the computer and the TFT monitor. 3 Connect the power supply . Con...