Évaluations - 0, GPA: 0
(
)
)
|
Photos et spécifications LG 24MB35PM |
Facilité d'utilisation
See the 'Specifications' section of this manual and configure your display again. Do you see a "NO SIGNAL" message on the screen? yyWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode. Do you see a "OSD LOCKED" message on the screen? Do you see “OSD LOCKED” when you push MENU button? yyYou can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Display image is incorrect Display Position is incorrect. yyPress the AUTO button to automatically adjust your display image to the ideal setting. On the screen background, vertical bars or stripes are visible. yyPress the AUTO button to automatically adjust your display image to the ideal setting. Any horizontal noise appearing in any image or characters are not clearly portrayed. yyPress the AUTO button to automatically adjust your display image to the ideal setting. yyCheck Control Panel > Display > Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). TROUBLESHOOTING 22 ENG ENGLISH CAUTION yyCheck Control Panel > Display > Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. yyIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. yyThe setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect The screen color is mono or abnormal. yyCheck if the signal cable is properly connected and use a screwdriver to fasten if necessary. yyMake sure the video card is properly inserted in the slot. yySet the color setting higher than 24 bits (true color) at Control Panel > Settings. The screen blinks. yyCheck if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? yyBe sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: yyMake sure to check if the video card supports Plug&Play function. SPECIFICATIONS 23 ENGLISH ENG SPECIFICATIONS 19MB35PM Display Screen Type 48.2 cm (19 inch) Flat Panel Active matrix-TFT LCDAnti- Glare coating Visible diagonal size: 48.2 cm Pixel Pitch 0.294 mm x 0.29...
Ce manuel est également adapté pour les modèles :Moniteurs - 24MB35PM-B (6.48 mb)
Moniteurs - 24MB35PM-W (6.48 mb)
Moniteurs - 24MB35PU (6.48 mb)