Log:
Évaluations - 2, GPA: 4 ( )

Instructions Behringer, Modèle EP1500

Fabricant : Behringer
Taille : 3.84 mb
Nom Fichier : 4e29e86e-3978-49cd-adca-73a54a97f714.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain and moisture. A This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual. DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the device is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the device and in the operating instructions should be adhered to. Follow instructions: All operation and user instructions should be followed. Water and Moisture: The device should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool etc.). Ventilation: The device should be situated so that its location or position does not interfere with its proper ventilation. For example, the device should not be placed on a bed, sofa, rug, or similar surface that may block the ventilation openings, or used in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat: The device should be situated away from heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. Power Source: The device should only be connected to a power supply of the type described in the operating instructions or on the device. Grounding or Polarization: This device must be grounded. Power Cords: Power cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords and plugs, sockets, outlets and the point where they exit from the device. Cleaning: The device should be cleaned only as recommended by the manufacturer. Non-use Periods: The power cord of the device should be unplugged from the outlet when left unused for a long period of time. Debris and Liquid Entry: Debris and/or liquids should not be allowed to enter the enclosure through openings. Damage Requiring Service: The device should be serviced by qualified service personnel when: ▲ The power cord or the plug has been damaged; or ▲ Debris or liquid has entered the device; or ▲ The device has been exposed to rain; or ▲ The device does not appear to operate normally or exhibits a pronounced change in performance; or ▲ The device has been dropped, or the enclosure damaged. Servicing: The user should not attempt to service the device beyond that which is described in the operating instructions. All other servicing should be referred to qualified service personnel. 2 EUROPOWER EP1500/EP2500 EUROPOWER High-end power amp with optional bridge mono operation mode for live applications ▲ 2 x 700 Watts (EP2S00: 2 x 1200 Watts) in 2-Ohm/1400 Watts (EP2S00: 2400 Watts) in 4-Ohm bridged operation ▲ 2-channel, parallel or bridged mono operating modes for flexible application ▲ Independent limiters for each channel offer dependable protection against distortion ▲ Precise signal and clip LED indicators to monitor performance ▲ Selectable low-frequency filters (30 Hz or S0 Hz) remove distracting infra-sound frequencies ▲ Professional Speakon® and “touch-proof” binding post loudspeaker outputs enable secure operation ▲ Balanced XLR and 1/4" TRS inputs ▲ Connection option for extra amps in parallel operation ▲ Ultra-reliable Toshiba®/Fairchild® high-power transistors ▲ High-quality components and exceptionally rugged construction for long life and durability ▲ High-current Toroid® toroidal transformer for absolute reliability and lowest noise emission ▲ “Back-to-front” ventilation system including air filter with automatically adjusting fan speed for smooth operation ▲ Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers ▲ Manufactured under IS09000 certified management system 3 EUROPOWER EP1500/EP2500 FOREWORD Dear Customer, welcome to the team of BEHRINGER users, and thank you very much for expressing your confidence in us by purchasing this power amplifier. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to develop two outstanding power amplifiers, whose flexibility lets them respond to all the P.A. and instrument amplification requirements. The task of designing our new EUROPOWER EPISOO and EP2S00 certainly meant a great deal of responsibility, which we assumed by focusing on you, the discerning user and musician. Meeting your expect...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories