Log: Ko#mon 9 ■■■■■=] 8 1310 <38 © /"! & A *- Q fcâ (B ÜP -* fnwvlli 9 8 H 4hV.«4.0 № Here are some items which can be adjusted as below, please press " J " to enter the item menu. • Clock: Press the "V" or "A" button to adjust the width of the screen. • Phase: Press the "V" or "A" button to reduce the noise on the screen. • Image Position a.H - Position: Press the "V" or "A" button to reposition the Image to the right or left. b.V - Position: Press the"V" button to move the Im
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC (WindowsXP) 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection. ENGLISH 3. In
Reset After the device has turned on, press it to reset the device or restore to factory default settings. The operation is as below: 0-3 seconds: reset the device 3-6 seconds: no action 10 seconds or above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password) POWER (jack) Connect the supplied power adapter to this jack. POWER Switch A Power ON/OFF switch ENGLISH 1.4 Cabling ENGLISH 1.4 Cabling First you must connect the product to the
.... 45 4. Specifications.............................................................................................................. .................... 46 5. Disfonctionnement ........................................................................................................... ............... 48 Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to cha
........... 22 3.3.2 Tasti +/- ................................................................................................................ .............. 22 3.3.3 Tasto Enter.............................................................................................................. ........... 22 3.3.4 Menu OSD ................................................................................................................. ........ 23 3.3.5 Tabella delle funzioni .........................
After a few seconds, the monitor will be in the best visual display mode. Color adjustment ( ) : when the function is selected, the monitor will come into the sub- menu, there are five functions that can be selected: 9300k, 7800k, 6500k, USER,W-B. Selecting USER you will enter user mode and you can make adjustment to R/G/ B obtain your satisfying color. Selecting W-B the monitor will adjust the white-black color reference voltage optimal color balance. A05-1XAX-C0X_ ENGLISH R/ G/ B adjustment (
VESA/70 1024.768 56.5 70 Non-interlaced 9. VESA/75 1024.768 60.0 75 Non-interlaced 10. VESA/60 1280.1024 64.0 60 Non-interlaced 11. VESA/75 1280.1024 80.0 75 Non-interlaced 7 Signal Connector Pin-outs To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector. A05-17AM-D01 - A05-17BM-D03 - A05-19BM-D02_X02 9 - 40 ENGLISH 7.1 15-pin Mini D-type Male VGA Connector 1 Red Video 6 Red Ground 11 Ground 2 Green Video 7 Green Ground 12 Serial Data/I/O 3 Blue Video
Tighten the two screws on the cable connector. A05-17AM-D01 - A05-17BM-D03 - A05-19BM-D02_X02 6 - 40 ENGLISH 3. Connect the DC power cord to the DC jack. 4. Connect the power cable. 3 Control Functions The monitor digital control functions are located on the front panel. They are shown in the figure below and described in the following paragraphs. 1. Power Switch with Indicator LED 2. Function Keys 4 Function Select With the .. and • knobs, you can adjust the speakers volume. Press the 1 knob to
