Service customer is hereby licensed to use the software only for activities directly relating to the delivery of, and only during the term of, the applicable services delivered by Compaq or its authorized service provider. Customer may not modify or reverse engineer, remove, or transfer the software or make the software or any resultant diagnosis or system management data available to other parties without Compaq’s or its authorized service provider’s consent. Upon termination of the services, c

Color Temp Right-Adjustment selects the color temperature to the right and Left-Adjustment selects the color temperature to the left. Reset This control resets the monitor to factory default values. Exit This control exits the OSD menu. 4–4 Reference Guide Operation Monitor Messages No Signal Message If a No Signal message displays on your monitor, check to be sure your video cable is properly connected and ensure that your computer is powered on. Out of Frequency Range Message If an Out of Freq

Speaker power cord is disconnected. Check all speaker power connections and make sure they are properly connected. Power button on right-side speaker may be off. Turn the power button clockwise on the front of the right-side speaker. Speaker LED should illuminate. No sound from speakers. Speaker audio plug may be disconnected from the back of the computer. Make sure your audio input jack (green connector) is plugged into the back of your computer. Mute button may be activated. Select the Speaker

5. To use an MP3 or CD audio device with your speakers, connect the audio device cable to the audio input jack 2 on the speaker. You must use a mini-stereo cable (3.5 mm/3.5mm plug) to connect the audio device to the speaker. 3–4 Reference Guide Installation Speaker Security Lock If your monitor has speakers, the speakers can be locked to the sides of the monitor. To use the Speaker Security Lock, follow these steps: 1. Grasp the front cloth-covered grill firmly at the sides and remove from the

Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Note: This monitor supports multiple VGA modes. Refer to the Preset Display Modes Table for a listing of modes supported by this monitor. Note PROBLEM: Picture is unclear and unstable. The picture is unclear and unstable, please perform the following steps : 1. Enter PC to "Shut Down Windows" status whil

Microsoft, MS-DOS, Windows, Windows NT are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited wa

(1990) Principles of Environmental Physics second edition. Edward Arnold (Hodder & Stoughton). Norman J M & Welles J M (1983). Radiative transfer in an array of canopies. Agron. J. 63:743-748. Norman J M and Jarvis P G (1975). Photosynthesis in Sitca Spruce (Picea sitchensis (Bong) Carr.) V. Radiation penetration theory and a test case. J. Appl. Ecol., 12:839-878 Russel G, Marshall B and Jarvis P (eds). (1989) Plant Canopies, their Growth, Form & Function. SEB Seminar series 31, CUP, Cambridge W

SCC-L07E-A D-1H CHASSIS SPECIFICATIONS 0.25 mm aperture grill pitch Power Consumption 17 inches measured diagonally Maximum 115W 90-degree deflection Nominal 100W, 341 BTU/h (16" maximum viewing image) Deflection frequency Horizontal: 30 to 85 KHz Approx. 329.5 x 243 mm (w/h) Vertical: 50 to150 Hz (13 x 9 5/8 inches) AC input voltage / current 100 to 120 V, 50/60 Hz, 1.8 A Horizontal: Max. 1280 dots 220 to 240V, 50/60Hz, 1A Vertical: Max. 1024 lines (at 75 Hz Refresh Rates) Dimensions 424 x 422

See: • How to install the monitor on a new computer on page 12. • How to upgrade the monitor on an existing computer on page 13 If you require a User Name and Password to login to your Windows computer, you must be logged on as an Administrator or as a member of the Administrators group in order to install the monitor driver software. Furthermore, if your computer is connected to a network which has security access requirements, network policy settings may prevent you from installing software on