Évaluations - 5, GPA: 4
(
)
)
|
Facilité d'utilisation
Exterior ends shall be 22-gauge stainless steel. Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf supports. Base shall be fully insulated with high-density foamed-in-place polyurethane. Refrigeration system shall use HFC-404A refrigerant. Compressor shall be 0 h.p., with condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evaporator coil and temperature control shall be mounted on the interior rear wall of the cabinet. Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain -5°F to 0°F (-21°C to -18°C) interior cabinet temperature. Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7' (2.1 m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of cabinet, centered left to right, 16" (40.6 cm) above floor. Equipment shall be mounted on 6" (15.2 cm) high metal legs with black enamel finish. THE FOLLOWING APPLIES TO MODEL 403 (SINGLE DOOR) ONLY: Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door handles shall be black, recessed and shall extend the full length of the top of the door. Cabinet shall have (2) adjustable epoxy-coated wire shelves installed. Optional accessories & modifications Stainless steel back Plastic laminate on front Additional wire shelves Stainless steel single-tier overshelf 3.5" (8.9 cm) diameter casters 5" (12.7 cm) diameter casters Door lock Full-size composite-type cutting top 220 volt, 50 Hertz electrical system The refrigeration system on this equipment uses HFC--404A refrigerant. REFRIGERANT The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed In U.S.A. 403 Delfield Self-contained compact work top freezers - 27.25"-69.2 cm 28.50" 72.4 cm PLAN VIEW MODEL 403 FRZR. 39.50" 100.3 cm 27.25"_ 69.2 cm SHELF SUPPORT SPACING A = 7.50719.1 cm B = 4.00710.2 cm C = 3.7579.5 cm D = 2.7577.0 cm E = 6.00715.2 cm 28.50" 72.4 cm 2.00" 5.1 cm .4.00" 10.2 cm BULLET FEET CAN ADJUST UPWARDS ONLY, UP TO+1.00"/2.5 cm 1.0072.5 cm RUBBER BUMPER INTERIOR CLEAR DIMENSION, LEFT TO RIGHT: 21.25754.0 cm ELEVATION VIEW MODEL 403 24.75" 62.9 cm STANDARD DOOR HINGING IS ON RIGHT HINGING MAY BE REVERSED AT INSTALLATION DOOR CLEARANCE DETAIL MODEL 403 INSTALLATION NOTE: Refrigeration system is designed so that air will flow under the unit, through the compressor area, and out the top rear of the unit. Any restriction to this air flow path will void the warranties. MODEL NUMBER NUMBER OF SHELF STORAGE SHIP SHELVES AREA CAPACITY* WEIGHT VOLTS/ HORSE- HERTZ/ NEMA POWER PHASE AMPS PLUG 403 2 7.2 ft 0.67 m 5.7 ft 0.16 m 184 lbs 84 kg 1/4 115/60/1 5.0 5-15P * STORAGE CAPACITY FOR DRAWER-BASE MODEL IS SHOWN FOR EACH DRAWER; MULTIPLY BY 2 TO OBTAIN TOTAL STORAGE CAPACITY The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A. DS403 02/01...