Évaluations - 3, GPA: 3.3
(
)
)
|
Facilité d'utilisation
The standard product will decode DTMF, Single-Tone, and Two-Tone Sequential, and optionally, EAS/SAME or Federal Signal Digital protocols. The Informer is capable of generating four (4) separate alarm sounds. This alarm can be followed by a voice message. The Informer also has a clearly marked LED panel which will flash to indicate an emergency alert has been received. Other features include a low battery indicator, built in diagnostics, and a Test indicator LED. Furthermore, this receiver can be programmed to disable the Monitor button to prevent end-users from listening to local channel activity. The Informer comes with a UL Listed wall transformer and a battery back-up system that can provide more than 1-1/2 hours of full monitoring or multiple hours in standby. Designed to be an attractive and durable product, the Informer can be wall ^ mounted and comes with a one-year warranty (see owner's manual). INFORMER SPECIFICATIONS Frequency Range (MHz) 33-50 150-174 450-470 Intermodulation Rejection per EIA-603, part 4,1,9 >-67 >-70 >-62 Adjacent Channel Selectivity per EiA-603, part 4.1.6 >-64 >-80 >-55 Spurious Response & Image Rejection (dBm) per EiA-603, part 4.1.8 >-80 >-80 >-75 Frequency spread allowable without re-tuning (MHz) +/-4.9 +/-1.5 +/-10,6 REFERENCE SENSITIVITY* (12dB SINAD): < 0.35 microvolts HUM AND NOISE* Squelched: > -57 dB Unsquelched: > -37 dB AC WALL TRANSFORMER (UL LISTED) Input: 108 to 128 VAC, 60 Hz Output: 9VDC @ 500 mA Operating Environment: -30 to +60C Operating Current: < 100mA, standby <400mA. Max. STANDARD SIGNALING FORMATS Number of codes: Up to 6 Activation Codes, programmable Two-Tone Sequential or Single Tone: 300 Hz-3000 Hz, tolerance +/-1.5% DTMF: M2 digits Two-Tone and DTMF Decode Sensitivity: <20 dB Sinad OPTIONAL SIGNALING FORMATS Federal Signal (MSK) Digital Option: 1200,N,8,1 Synchronous, 1200 Hz mark tone, 1800Hz space tone Digital Decode Sensitivity: <12 dB Sinad EAS/SAME Option: User Programmable to any EAS Event codes and up to three (3) location codes EAS/SAME Decode Sensitivity: <18 dB Sinad CTCSS/CDCSS: Decode with Two-Tone codes > 400 Hz only. Tone Frequency Range 36.6 to 254,1 Hz, Tone Accuracy > ,05Hz Tone Decode Bandwidth +/-1.1% CTCSS/CDCSS (Continued): Digital, Golay (23,12) 23 bit digital word Digital Data Rate 134.4 Hz nominal Decode: Turn on Time < 250ms., Turn off Time < 1,2s. Acoustic Output: 85 dBA** RECHARGEABLE BATTERY Type: Sealed Lead Acid Rating: 6 VDC, 1.2 A/H Minimum life without AC power: 6 Hours @ 25% run time DRS0600 Option Relay Output (optional): SPST 8A @ 24 VDC, 8 A @ 115 VAC 600 Ohm Output (optional): 50mv - 2.5vpp into 600 Ohms Antenna: Removable rubber duck External Antenna Connector: 50 ohm, BNC female Model IS2 Strobe (optional): 100 Candelia, 60 flash min, DIMENSIONS Height x Width x Depth: 5" x 1" x 2-1 /2" (10° incline) Weight: 4 lbs ORDER INFORMATION l-U VHF Low Band, 33-50 MHz l-H1 VHF High Band, 151-174 MHz l-U1 UHF Band, 450-470 MHz Options l-EAS Installed EAS l-EAS-KIT Field Installable EAS Kit l-FSK Installed FSK l-FSK-KIT Field Installable FSK Kit l-SW Programming Software 'Dual Relay/600 ohm output models are also available. Add IO to the model number when ordering. The Dual Relay/600 ohm option must be ordered with the Informer model. There is a programming fee associated with Informers programmed at the factory. Contact your local representative for a quotation. The Informer is designed for wail mounting, mounting screws are not included, * Receiver Specifications referenced to TIA/EIA 603 **Acoustic Output measured at 10' on axis in an anechoic environment Vance I re less C O M M UN I C 0 N S ...... 20809 Kensington Boulevard ♦ Lakeville, Minnesota 55044 952.469.5400 ♦ toll free: 800.475.5852 ♦ fax: 952.469.0170 www.advancedwireless.com...