Évaluations - , GPA:
(
)
)
Fabricant : Elta
Taille : 3.94 mb
Nom Fichier : 4210b8d8-e686-29c4-791d-ea100f05860b.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
45 rpm adaptor 4. Cue lever 5. Tone arm 6. Speed selector 33 / 45 / 78 7. Locking device for the tone arm 8. Tone arm rest 9. AUTO STOP ON - OFF: Auto stop function of the turntable ON / OFF 10. FM ANTENNA: FM antenna 11. Power cord 12. AUX OUTPUT: Audio output jacks left / right 1 2 Folding lever for the dust cover 3 45678 Before the first use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow. AUX OUTPUT 11 12 10 9 UNPACKING Take out carefully the device from the packing. Please keep the packing for further use. Remove all adhesive strips. The dust cover is separately packed and must be inserted into right folding lever on the rear. The left space is to insert into the taking in. POWER SUPPLY Connect the mains power cable (11) at the rear to a 230 V ~ 50 Hz wall socket. Warnings • Ensure the mains power supply corresponds with the specifications on the type label (230 V). • Do not touch the plug with wet hands. • Disconnect the device from mains power supply during longer periods of non-use (vacation etc.). • To avoid cable damage and resulting dangers always handle the plug and not the cable when disconnecting from mains power supply. COMMON OPERATION INSTRUCTIONS On / Off To turn on the device press the button POWER (1) at the front. The POWER indicator (1) lights red. The background light of the frequency scale lights up in blue. To turn off the device press POWER (1) again, the blue background light turns off. Changing of the operation mode Select the mode with the function selector (3) at the front. Set RADIO for radio operation or PHONO for turntable operation. Connections The operation of the device is easy, except for the mains power cable no connections are to be made. Antenna For better FM reception uncoil the FM wire antenna (10) at the rear of the unit. For better AM reception the unit has to be directed (built-in ferrite antenna. Headphones For private listening connect headphones with an impedance of least 8 ohms (not supplied) to the 3.5mm headphones jack (9) at the front. The speakers are automatically muted. Balance Adjustment of the volume ratio between the right and left stereo channel. Under normal listening conditions and with the operation of identical loudspeakers the balance automatic control (8) is to be set to the central position. A clockwise rotation of the control means increasing the volume of the right channel and in reverse. 16. 17. VU METERS Volume level indicators of the left and right stereo channel. AUX OUTPUT (AUDIO-OUTPUT) You can connect an external amplifier or external speakers (4 ohms, not supplied) with a stereo audio cable to the AUX OUTPUT jacks (12) at the rear of the device. Note: The built in speakers of the device will be not muted. RADIO FM / AM (All controls are at the front of the device) 1. Set the function selector (3) to the RADIO position. 2. Set the band selector (4) to FM or AM. 3. Select your favorite station with the tuning control (7), the frequency will be shown on the frequency scale. 4. Turn VOLUME (6) to adjust the volume. 5. To turn off the radio press button POWER (1) or switch with the function selector (3) to the PHONO position. Antenna Uncoil the FM wire antenna (10) at the rear of the unit. For better FM reception move the wire antenna. For better AM reception rotate the whole device, until you find the best reception (built in ferrite antenna). TURNTABLE Open the cover of the turntable by lifting it with the left and right handholds. Unlock the tone arm rest locking device and remove the protective cover from the stylus towards the front. Playback of a record 1. Set the function selector (3) at the front to PHONO. 2. Place a record centered on the turntable (1). When playing singles (17cm) use the 45-rpm on the axis in the middle. 3. Set the speed selector (6) according to the record to 33, 45 or 78 position. 4. Lift the tone arm (5) with the cue lever (4). 5. Place the stylus above the edge of the record or any position above the record you want to play. 6. Lower the tone arm (5) with the cue lever (4) carefully on the record to start playback. 7. At the end of the record the turntable stops automatically. Lift the tone arm (5) carefully with the cue lever (4) off the record and place it back on the tone arm rest (8). 8. To interrupt or stop playback before the end of the record, lift the tone arm (5) carefully with the cue lever (4) off the record and place it back on the tone arm rest (8). 9. For some records the turntable stops before the end of the record. In this case set the auto stop switch (9) at the rear to OFF to enjoy the full length of the record. Important Notes • Do not stop or rotate the turntable by hand. • Do not lift the tone arm manually off a turning record; use instead the cue lever (4). • Use the tone arm locking device to avoid damage to pick-up system and stylus. • At nonuse fix the stylus guard of the stylus at the pick-up system....