Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
“STEREO" (“ST” for SC-AK33 and SC-AK22) is displayed when a stereo FM broadcast is being received. Adjust the volume. Auto tuning Press and hold [TUNE/TIME ADJ (V) or (A)] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may not function when there is excessive interference. • To cancel auto tuning, press [TUNE/TIME ADJ (V) or (A)] once again. ^ It noise is excessive in FM Press [ K4A44 FM MODE/BP] to display “MONO”. This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural. Press [ W4/-44 FM MODE/BP] again to cancel the mode. “MONO” goes out. MONO is also canceled if the frequency is changed. Turn off “MONO" for normal listening. Stereo and monaural broadcasts are automatically played as they are received. FM allocation setting By adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps. Press and hold [TUNER, BAND], After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time. To return to the original frequency indication, repeat above. esa • After changing the “allocation” setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast. RQT5621 I J.l~ M >L_L± о ~i q * u I. _i - T □ OCD cb Ö 7 0 9 0 О □ □ □ PAOOMICANCa HPtAT МЮСН О □□□ AUX Тъ(ЗГ UPE “W” a ÊQ 30 AJ □ ojo о MUTING fi7ÏÏ7v liCLEAR ►Л о kb о о -J-TrJ-n Panasonic TUNER Г" ь* i t i q "i q о f. D 1----2—,—3 ООО 4-5—^ 6 >10 О О О О 7 8 9 0 о о о о Ъ Г- Preset channel Г и С им _( i-i ^ ! - VOLUME + Ю) CZ Ъ Presetting radio broadcasts There are two methods of presetting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 12 stations each can be set in the FM and AM bands. Do the following once each for FM and AM. Preparation: • Tune to the frequency where presetting is to begin page 12). Press and hold [MEMORY ►►/►►! ]. Release the button when frequency begins to change. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. Manual presetting Preset the stations one at a time. (1) Press [TUNER, BAND] to select the “FM" or “AM”. (2) Press [MEMORY ►►/►►! ] then press [TUNE/TIME ADJ (V) or (A)] to tune to the required station. © Press [MEMORY ►►/►►! ] then press [TUNE/TIME ADJ (V) or (A)] to tune to select a channel. (D Press [MEMORY ►►/►►( ]. The station occupying a channel is erased if another station is preset in that channel. by remote control Press [TUNER] to select “FM” or “AM”. The unit comes on automatically. Every time you press the button: FM <-» AM В В Press the numbered buttons to select the channel. • To select channel 10 or over Press [>10] then the two digits. Adjust the volume. On the main unit © Press [TUNER, BAND] to select “FM” or “AM”. @ Press [■, TUNE MODE] to select “PRESET’. (3) Press [TUNE/TIME ADJ (V) or (A)] to select the preset channel. 13 RQT5621 Radio operations Compact disc operations B Concerning compact discs With this system, you can only play compact discs having this mark. Q However, do not use irregular shaped CDs. CDs of the sort can damage the unit. DIGITAL AUDIO Handling precautions • If you are taking the disc from a cold to a warm environment, moisture may form on the disc. Wipe this off with a soft, dry, lint-free cloth before using the disc. • Do not write on the label side with a ball-point pen or other writing instrument. • Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. • Do not attach labels or stickers to CDs. (Do not use CDs with exposed adhesive from tape or left over peeled off stickers.) • Do not use scratch-proof protectors or covers other than those specified for use with this system. • Do not use CDs printed with label printers available on the market. Storage precautions Be sure to store discs in their cases to protect them from dust, scratches, and warping. Do not place or store discs in the following places • Locations exposed to direct sunlight • Humid or dusty locations • Locations directly exposed to a heat vent or heating appliance • In the glove compartment or on the rear deck of an automobile To prevent damage Always observe the following points. • Q Load only 1 CD on the tray. • Q Load CDs as shown in the figure. The adapter is not needed with 8cm CDs (singles). • Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. • Do not ...